I purchased an Audio Authority Bluebeam C-1071A to control a PS3 via a MSC-400. The MSC-400 is triggered by a MX-3000. Because I'm using the MX-3000, I'm limited to using the stand alone MSC-400 editor.

I used the IR codes from the MSC-400 IR Library Aux/Audio Authority/C1071 (n/a). There is no A but that was the closest I found. I also tried the Sony PS3 IR commands in the MSC-400 library. Nothing works.

I have the C1071A set for external ir only (front panel) and the ir is firing. I also have the C1071A set to flash the led in response to ir commands. This is not happening so it appears the C1017A is not understanding the commands.

Any ideas?

Thanks in advance.