Ok.. maybe I am misunderstanding something. I thought Celerity only required USB/power at the RX side. Our Zektor MAtrix will have Celerity on the input side. We will have six laptop station throughout the conference room with Celerity runs back to a racked Zektor Matrix (Clarity Elite HD). Since I thought we only needed power at the Matrix (RX side of Celerity) we were going to use some sort of USB hub to power the six Celerity runs. These would all be inputs into the matrix. We firgured a USB hub will allow us to power all six runs with just one device / power supply.
The outputs will be a 70" Sharp, 90" Sharp, and an Optoma Projector. However, there are all going to be Zektor Baluns since we do not want to run any Celerity during construction (the laptop stations mentioned above all have pvc conduit to allow us to pull the Celerity through later).