On October 11, 2012 at 23:43, rumnyc said...
I already saw it, but I have to admit I need a bit more help.
So I need:
* 12v wall wart to both power the unit and to supply trigger voltage to component
* An IR receiver
* some cable to connect to the 12v trigger port on the amp
* the xantech universal remote to learn the codes
The last image from the manual seems to be close to what I want but no IR receiver is used so very confused.
Yes, with this piece you would need a 12v wall wart and an IR receiver or RF to IR processor. Sorry, I saw URC remote and assumed you were already using a processor. Didn't realize that you were doing straight IR from the remote.
Maybe someone else can chime in with a better solution.
As far as the RC68x Xantech codes go, they should be floating around this site for sure and if not, I could learn the codes and post them for you myself as I have that remote in stock.