On September 24, 2012 at 13:40, SB Smarthomes said...
I still stand by the external crossover if you can fit it into the budget.
One of the benefits for this job is that with the big Control 29s I ended up with a crossover point that sounded best around 70hz. The lowest crossover point in the CDi DSP I think was 90hz so the external crossover let me select a better sounding setting and was more flexible.
Crown has an iPad app for some of the newer amps, but I don't think it works with the CDi models that only have a USB port (no Ethernet).
We mainly use the i-tech or xti crown stuff. You must be using the CDI series because of the 70 volt. I have never used any of the CDI series.If you dont connect the amps to a laptop with the software then you will not get a variable platform to eq with. if you just use the front control panel you will be limited in your range. It seems like we hooked up a a cdi to our laptop before and used the software to get a better range than the front panel. Is this how you are doing this?