|
|
|
RS-232 & IP Control Forum - View Post
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Post 5 made on Wednesday February 15, 2012 at 19:02 |
This is known to work on the BDL series. (A pasted report from Code Manager) Note that as it says the panel is set to address 1 The serial comms on these units is very unforgiving of any noise or even an invalid command, such as Auto Adjust while in CVBS mode. A power cycle is required to recover.
Phil BDL4231 Addr 1 9600bd 00: Standby 05 01 18 01 1D 01: AV input 08 01 AC 01 00 00 00 A4 02: Card AV 08 01 AC 01 01 00 00 A5 03: Component 1 input 08 01 AC 03 00 00 00 A6 04: Component 2 input 08 01 AC 03 01 00 00 A7 05: VGA input 08 01 AC 05 00 00 00 A0 06: HDMI 1 input 08 01 AC 09 00 00 00 AC 07: HDMI 2 input 08 01 AC 09 01 00 00 AD 08: On 05 01 18 02 1E 09: Auto Adjust 06 01 70 40 00 37 10: Set Power Save Low 06 01 DD 00 01 DB 11: Set Power Save Mid 06 01 DD 00 02 D8 12: Set Power Save High 06 01 DD 00 03 D9
|
|
|
|
|
|
|