Thanks but I need the hex commands for the Philips LCD screens for the Serial Xpress interface.
e.g. the switch on commands for an NEC screen is rs232.tx_hex=AA11FE010111
switch to HDMI input
rs232.tx_hex=AA14FE012134
An example from a Sqamsung RS232 manual is shown below, I can convert these commands to hex, what I am after is the commands.
Ex) Power On & ID=0
Header | Command | FF | Data Length | Data 1 | Check Sum |
0xAA | 0x11 | | 1 | Power | |
¡æ Header | Command | FF | Data Length | Data 1 | 12 |
0xAA | 0x11 | | 1 | 1 | |