Post 2 made on Wednesday December 29, 2010 at 21:42 |
sydinstaller Active Member |
Joined: Posts: | February 2004 740 |
|
|
The emulator uses your computers connection Ethernet so it is wrong to think the S70 will work.
It is a good indicator that your programming is correct though.
What you need to do is look within the S70's configuration to see if it is actually joining your network. Settings/WiFi.
The most common issues are: 1. Wrong SSID, caps sensitive. 2. Wrong security type selected 3. Wrong security code entered. 4. MAC filtering set on router. 5. Wrong region set. 6. No DHCP server set on router. 7. WiFi turned off on the remote.
As a rule i would say to disable the security on the network to start with. Then once it connects put security back on.
Also, as this is a "N" router you may need to turn off ALL the "N" features.
Hope this helps.
D.
|
|
|