I am trying to set up my TSU3000 and RFX9400 on a network. I have been successfully using my remote setup for quite some time in stand alone mode. I am now adding a PC to my home theatre and am trying to set up Microsoft Media Centre using PadOne. This requires the switch to network mode. Right?
The current network consists of 3 computers: 2 iMac's and one PC running Windows 7 Ultimate. This will be used for the Media Centre.
Internet is provided through a broadband cable modem to a D-Link DIR300 wireless router. The iMac's connect to the router with ethernet. The Media PC connects wirelessly via a Netgear Wireless-N150 USB adapter (WNA1100). This network is working fine.
The TSU firmware is the latest - V7.2.22 The RFX firmware is the latest - 1.4.7 The PEP Software is 2.4.23.0
With the current setup I have the control panel says "command failed" when I presss a button on the menu and the diagnostic log says "0450 Extender 192.168.0.107 didn't reply".
Current setup:
DIR300 Router setting: IP 192.168.0.1 Subnet Mask 255.255.255.0 DHCP range: 192.168.0.100 to 199 Broadcast mode set to g only.
Control Panel in PEP: SSID RRM WEP64 (corresponds to router setting) PassPhase: ***** Fixed IP 192.168.0.110 Subnet Mask 255.255.255.0 Default Gateway 192.168.0.1 DNS 192.168.0.1
Extender in PEP: Extender 0 Fixed IP 192.168.0.107
Extender Configuration: Configured using the Pronto supplied cable to one of the iMacs which also runs Win 7. I was unable to configure the RFX to the router with a straight ethernet cable. The extender discovery function returned no result.