| Title & Author | Description | Details |
Alan Minchew's MX-700 Setup
From: Alan Minchew
For: HTM MX-700 (System) | A complete MX-700 setup with discrete codes for most devices.
Devices: DSS/DVR: Philips DSR6000, DVD 1: Denon DVD-1600, DVD 2: CyberHome CH-DVD500, Preamp: Anthem AVM-20 v2, Television: Sony KP-53XBR45, VCR: Mitsubishi HS-U580 | File: alan-minchew_mxf.zip
Size: 27kb
Date: 12/01/03 |
Arna Perry's System Setup
From: Arna Perry
For: HTM MX-700 (System) | This is a first cut at my system. I used the 2nd page of Main for my on/off switches. Please feel free to comment and suggest.
Devices: CD: Denon DCM-560, DVD: Pioneer DV-414, DVR: Hughes TiVo Series 2, Receiver: Yamaha RX-V995, Television 1: Sony KV-32XBR200, Television 2: Sony KV-24FV12, VCR: Panasonic PV-V4640 | File: arna-perry_mxf.zip
Size: 20kb
Date: 12/01/03 |
Bill Spence's MX-700 System
From: Bill Spence
For: HTM MX-700 (System) | Many hard to find discrete codes. I use the mute and prev ch buttons to toggle between my receiver and DVD/TiVo. I also use push and hold macros extensively. My two DSS receivers are next to each other so I have one set for ID 1 and the other to ID 51. I am still looking for a VIDEO 7 discrete for the TV and any Yamaha DSP discretes. Thanks to Greg for doing the hex conversions!
Devices: CD: Sony CDP-CX400, DSS 1: Sony SAT-HD200, DSS 2: Sony SAT-T60, DVD: Sony DVP-NS755V, Receiver: Yamaha RX-V3200, Television: Sony KV-34XBR800 | File: bill-spence_mxf.zip
Size: 25kb
Date: 12/30/02 |
Bill Wilson's Home Theater
From: Bill Wilson
For: HTM MX-700 (System) | I have it so that I can control the DSP fuctions of my DSP-A1 and Dolby and DTS setting on each device so that I can switch between them and stereo easily. So I am sure a lot of you will need to erase buttons you don't need but I believe all the nessasary ones are there. I have discrete codes for everything except the Motorola cable box.
Devices: Amplifier: Yamaha DSP-A1, Cable: Motorola CFT-2244, CD: Adcom GCD-600, DVD: Pioneer DV-45A, Television: Sony KV-32TS36, VCR: Sony SLV-940HF | File: bill-wilson_mxf.zip
Size: 13kb
Date: 04/28/03 |
Brian Steeves' System
From: Brian Steeves
For: HTM MX-700 (System) | Here is a complete system configuration including macros and learned codes for most of the devices that are not in the HTM database.
Devices: DSS/HDTV: Sony SAT-HD200, DVD: Denon DVD-2200, Preamplifier: B&K Ref 30, Television: Mitsubishi WS-65413 | File: brian-steeves_mxf.zip
Size: 15kb
Date: 03/23/04 |
Brian Steeves' Second System
From: Brian Steeves
For: HTM MX-700 (System) | A full system MXF based around the Onkyo TX-NR807 receiver.
Devices: Cable: Scientific Atlanta Explorer 4250HDC, DVD: Denon DVD-2200, Game: Sony Playstation 3, Receiver: Onkyo TX-NR807, Television: Panasonic TC-P54G10 | File: brian-steeves_mxf2.zip
Size: 18kb
Date: 01/15/10 |
Brian Troy's MX-700 MXF
From: Brian Troy
For: HTM MX-700 (System) | This system file has been a work in progress until recently. I feel that the "POWER" page helps just in case one of your TOAD devices is out-of-sync. I also added a "GOTO" page where I stored all my switching macros.
Devices: DVD: Pioneer DV-363, DVR: ReplayTV, Receiver: Pioneer VSX-D912, Television: Panasonic PT-47WX42, VCR: Magnavox | File: brian-troy_mxf.zip
Size: 25kb
Date: 07/30/03 |
Chris Rouvalis' System
From: Chris Rouvalis
For: HTM MX-700 (System) | This is the beginning parts of my new home theater. I hope some of these codes, macros, and LCD button layouts can be of use!
Devices: Cable/DVR: Motorola DCT6208, DVD: Samsung DVD-HD841, Game Console: Microsoft X-Box, Reciever: Yamaha HTR-5790, Television: Sony KV-36XBR450 | File: chris-rouvalis.zip
Size: 13kb
Date: 12/04/04 |
Chuck Hutchins' MXF
From: Chuck Hutchins
For: HTM MX-700 (System) | A complete MX-700 setup with discrete codes.
Devices: DVD: Panasonic DVD-RP56, DVR: Philips TiVo, LD: Pioneer CLD-D750, Receiver: Yamaha RX-V3000, Tape: Yamaha KX-650, Television: Pioneer SD-533HD5, VCR: Sony SLV-N81 | File: chuck-hutchins_mxf.zip
Size: 15kb
Date: 03/09/03 |
Damian Anzelmo's MX-850
From: Damian Anzelmo
For: HTM MX-700 (System) | The 1st LCD page has the macros on the left of the LCD screen and the device components on the right. Buttons right of the LCD control the macros and buttons left of the LCD control the device components. After the macro executes it defaults to the device’s LCD control page. Favorite channels are for the Dish Network DSS system. This is my 1st attempt at programming the MX-850, I’ve had it for a week.
Devices: DSS/DVR: Dish Network DVR-510, DVD: Sony DVP-NS500V, Game: Microsoft X-Box, Receiver: Yamaha HTR-5790, Television: Toshiba 61A60 | File: damian-anzelmo_mxf.zip
Size: 17kb
Date: 08/09/05 |
Daniel's Home Theater Setup
From: Daniel Tonks
For: HTM MX-700 (System) | My complete home theater system on the MX-800 remote control. Utilizes simple device-switching macros and offers complete component control. Works well with both inexperienced users and the technically savvy.
Devices: Cable DVR: Scientific Atlanta 8300HD, Camcorder: Sony HDR-FX1, DSS: Pansat 9200HD, DVD: Sony DVP-NS999ES (ID 2), Game: Sony PlayStation 3 (IR4PS3), HD DVD: Toshiba HD-A35, HDTV DVR: Sony DHG-HDD500, HTPC: Microsoft MCE 2005, TV: Pioneer Elite PRO-150FD, Receiver: Marantz SR9600, Rotor: Channel Master 9537A, Sub: Velodyne DD-15, VCR: JVC SR-V10U, Tape: Sony TC-WE625 | File: daniel-tonks_mxf.zip
Size: 92kb
Date: 05/07/08 |
Daniel's Bedroom Setup
From: Daniel Tonks
For: HTM MX-700 (System) | My complete bedroom television system as used with an MX-800 remote control. Utilizes simple device-switching macros and offers complete component control. Works well with both inexperienced users and the technically savvy.
Devices: Cable DVR: Scientific Atlanta 8300HD, DVD: Sony DVP-NS715P, HTPC 1: Microsoft MCE 2005, HTPC 2: Streamzap PC Remote, TV: Philips 42PF9730A/37, Receiver: Panasonic SA-XR57 | File: daniel-tonks_mxf2.zip
Size: 35kb
Date: 05/11/07 |
Darin Cline's Setup
From: Darin Cline
For: HTM MX-700 (System) | Not yet complete. The main purpose of this file is to show the use of press & hold macros. Each device button on the main menu is a press & hold macro... press normally, and the required components turn on & get set to the appropriate settings, and the remote is switched to that device page. Press very quickly (0.1 seconds) and the remote switches to the device page, but none of the macros are run. For me, this is more convenient that the standard method of bypassing the macros by holding down the MAIN button while hitting the device button. Press & holds are also used in the TiVo and DVD devices to combine multiple commands into one hard button... FF becomes forward skip if you hold it for more than 0.2 seconds, RR-rear skip, play-1 minute jump, pause-slomo. Also, the power off on individual devices turns off only that device if you press less than 0.1 seconds, or the whole system turns off if you press normally (more than 0.1 seconds).
Devices: DSS/HDTV: Samsung SIR-TS160, DSS/DVR: Philips DSR6000, DVD: Pioneer DV-563A, Lighting: X-10 IR543, Receiver 1: Onkyo TX-SR700, Receiver 2: Sherwood RD-6108, Television: Sony KP-46WT510 | File: darin-cline_mxf.zip
Size: 22kb
Date: 04/28/04 |
Darren Davies' System MXF
From: Darren Davies
For: HTM MX-700 (System) | My first setup - please bare with me!
Devices: DSS 1: RCA DWD490RE, DSS 2: RCA DRD2200, DVD: Microsoft X-Box DVD, Receiver: Kenwood VR-7080, Television: Toshiba 32AF62, VCR: JVC HR-S5900U | File: darren-davies_mxf.zip
Size: 21kb
Date: 10/07/03 |
Dave Fitzgerald's MX-850
From: Dave Fitzgerald
For: HTM MX-700 (System) | This is a system setup for my own personal system. Some of them are discrete, some are not. There was a few pieces that had no discretes, so I improvised. The Onkyo receiver is part of a HTIB and with the power, only the off command is discrete. I could not find any discrete on command for this model. The TV has no discrete power or inputs so that was the toughest. I found a way to trick the system and work around the lack of discrete inputs. The only reason it worked is becuase this TV has seperate input commands for composite and componet and as long as you know the order, it's easy to trick and works flawlessly. I had to use an all on command because the lack of discrete on this TV.
Devices: DVD: RCA DRS700N, Cable: Pace, Receiver: Onkyo HT-R410, Television: Samsung TX-M2796HF, VCR: Mitsubishi HS-U746 | File: dave-fitzgerald_mxf.zip
Size: 14kb
Date: 06/05/05 |
David Bulfer's MXF Setup
From: David Bulfer
For: HTM MX-700 (System) | Discrete codes for everything but the DSS. Main page 1 are devices; page 2 are activities.
Devices: DSS/HDTV: Sony SAT-HD200, DVD: Denon DVD-3800, DVR: TiVo Series 2, Receiver: Sony STR-V444ES, Television: Fujitsu P50XHA10 | File: david-bulfer_mxf.zip
Size: 23kb
Date: 10/07/03 |
David Harrison's MX-700
From: David Harrison
For: HTM MX-700 (System) | This is an improved (more compact and efficient use of MX-700) file, compared to my earlier posting. In this new posting, the format of the buttons is aligned with the content of the "Guide to Simple Home Theater Operation" provided with the remote - so my family can now refer to the guide. It incorporates discrete ON/OFF for the Yamaha receiver, an on/off workaround for the old analogue Foxtel box, and a discrete off code for the Teac set top box (derived from hex code loaded into a Pronto editor, then imported).
Devices: Cable: Pace STU-100, CD: Sony CDP-C245, DVD: Pioneer DV-344, Receiver: Yamaha RX-V750, STB: Teac DV-B800, Television: Pioneer PDP-435FDE, VCR: Sharp VC-H84 | File: david-harrison_mxf.zip
Size: 22kb
Date: 10/23/05 |
David Markowitz's System Setup
From: David Markowitz
For: HTM MX-700 (System) | This system file contains all existing discretes for these devices with the exception of a few input settings on the HS10 that I don't use. It includes the hard to learn joystick commands of the SIR-T150! It also has X-10 lighting using scenes, Makita curtains and a Stewart screen on a single ROOM page, with several interesting macros that control all of those things and pause/play movies.
Devices: CD: Denon DCM-320, Draperies: Makita, DVD: V Inc. Bravo D1, DVR: Hughes GXCEB0T, HDTV: Samsung SIR-T150, LD/DVD: Pioneer DVL-700, Lighting: X-10 IR543, Projector: Sony VPL-HS10, Receiver: Denon AVR-5600, Screen: Stewart Filmscreen LX092H, Television: Proscan CinemaScreen, VCR: Sony SLV-R5 | File: david-markowitz_mxf.zip
Size: 28kb
Date: 12/01/03 |
Dean Wette's System
From: Dean Wette
For: HTM MX-700 (System) | A complete system setup. Also includes separate device files.
Devices: DVD: Arcam DV88 Plus, DSS/HDTV: Samsung SIR-TS160, Receiver: Arcam AVR200, Television: Samsung HLN617W | File: dean-wette_mxf.zip
Size: 31kb
Date: 01/28/04 |
DJ Garcia's MXF File
From: DJ Garcia
For: HTM MX-700 (System) | A complete system MXF file with a large number of devices.
Devices: CD: Sony CDP-X779ES, DSS: Sony SAT-A3, DSS/DVR: Sony SAT-T60, DVD: Sony DVP-S9000ES, Lighting: Powerhouse IR543, Preamp: Sony TA-E9000ES, VCR: Sony SLV-R1000, TV: Sony KW-34HD1 | File: dj-garcia_mxf.zip
Size: 27kb
Date: 06/05/02 |
Previous page...
