Your Universal Remote Control Center
RemoteCentral.com
RS-232 & IP Control Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
sony fwl-75w855c rs232
This thread has 1 response. Displaying all posts.
Post 1 made on Wednesday August 5, 2015 at 08:35
peterrask
Lurking Member
Joined:
Posts:
August 2015
1
Hi,
quite new to this forum, but hi anyway.
Im using a vision techconnect panel called tc2-ctl3 controller. and I would veru much like to control the sony fwl-75w855c using this panel.
Only problem is, the tv does not have an rs232 input. only thing I can find is a minijack input called serial control, remote. How does this Work? do i need a converter or?
Post 2 made on Thursday August 6, 2015 at 19:47
schlepp571
Long Time Member
Joined:
Posts:
November 2008
123
I don't fully recall the pinout on Sony tvs but play with it. tx-tip, rx -ring, ground on the sleeve would be my first try on the 3.5mm jack.

Also, if you haven't programmed one of those before, the carriage return is goofy. No /r, CR etc. You type in the serial string and press enter on your keyboard. That is the carriage return. Threw me off for quite awhile.

Good luck.
No, it doesn't come preprogrammed.

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse