Your Universal Remote Control Center
RS-232 & IP Control Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from


Hitachi CP-X5022WN RS232 Commands
This thread has 1 response. Displaying all posts.
Post 1 made on Monday May 18, 2015 at 15:11
Lurking Member
May 2015
I'm very new to RS232. I have a Hitachi CP-X5022WN that I would like to be able to turn on and off via Termite (or another Terminal program) using RS232 commands.

The manual has the following information:

Turn Off: BE EF 03 06 00 2A D3 01 00 00 60 00 00
Turn On: BE EF 03 06 00 BA D2 01 00 00 60 01 00

I have everything setup for COM4 the correct baud rate etc.

The problem I'm having is that I have no idea how to get these commands to work. I entered in all of the characters into Termite and nothing happens.

Is there something that I need to do with those characters to make them happen?

I have an ASK Proxima projector as well and all I had to do with it was type in A01 or A00 to turn on and off the projector.

The following is similar/same manual I have: [Link:]
Post 2 made on Thursday July 16, 2015 at 22:02
Lurking Member
October 2011
Hi MrOblivious,

First, u must confirm the correct baud rate is 19200,none parity,8 bit,1 stop bit.
Second, the software u use is hyperterminal, which cannot type Hex code.
You should find another software, like AccessPort.

May this can help u.


Jump to

Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse