 |
 |
|
|
RS-232 & IP Control Forum - View Post
|
|
 |
|
10/10/25 - It’s been so long since we’ve last seen you!
10/24/22 - In searching for the perfect day, Timmy discovers something unexpected!
9/04/22 - That childhood favorite is back in a new Timmy video.
7/31/22 - It’s time for my second new Just Like Timmy video!
7/12/22 - Why not check out my new YouTube animation channel, Just Like Timmy!
|
|
 |
|
|
The following page was printed from RemoteCentral.com:
|
Panasonic PT-AX100 PT-AX200 Projector Codes
| |
|
| Topic: | Panasonic PT-AX100 PT-AX200 Projector Codes This thread has 10 replies. Displaying all posts. |
|
| Post 1 made on January 31, 2014 at 19:50 |
SysIntegration Advanced Member |
Joined: Posts: | December 2013 895 |
|
|
HDMI 1\x02IMS:HD1\x03 HDMI 2 \x02IMS:HD2\x03 SVideo \x02IMS:SVD\x03 Video \x02IMS:VID\x03 Menu \x02IMS:VID\x03 Down \x02OCD\x03 Left \x02OCL\x03 Right \x02OCR\x03 Up \x02OCU\x03 P-Off \x02POF\x03 P-On \x02PON\x03 Component \x02IMS:YUV\x03 PC \x02IMS:RG1\x03 Enter \x02OEN\x03 Aspect \x02VS1\x03 I also have codes for video modes (game, natural, dynamic).
|
0101001101111001011100110100100101101110011101000110010101100111011100100110000101110100011010010110111101101110 |
|
| Post 2 made on February 9, 2014 at 01:22 |
danieljgor Long Time Member |
Joined: Posts: | December 2008 105 |
|
|
hI maTE, dO YOU HAVE THESE FOR THE pt-ae100E? tHANKS |
|
| OP | Post 3 made on February 9, 2014 at 12:42 |
SysIntegration Advanced Member |
Joined: Posts: | December 2013 895 |
|
|
On February 9, 2014 at 02:22, danieljgor said...
hI maTE, dO YOU HAVE THESE FOR THE pt-ae100E? tHANKS That's an old projo. I checked my codes for the PT-AE900 / PT-AE2000 / PT-AE4000 and the codes are the same as the ones I posted above. Did you try them? |
0101001101111001011100110100100101101110011101000110010101100111011100100110000101110100011010010110111101101110 |
|
| Post 4 made on February 9, 2014 at 16:07 |
danieljgor Long Time Member |
Joined: Posts: | December 2008 105 |
|
|
hi mate, yes power on and off only works thanks
Daniel |
|
| OP | Post 5 made on February 10, 2014 at 18:50 |
SysIntegration Advanced Member |
Joined: Posts: | December 2013 895 |
|
|
Yep. You're right. The code structure is different. I only looked at power. Sorry about that. Also, when I copied and pasted my directional buttons, I clearly missed a digit. Those directional listed above probably won't work for anyone with my mising colon. Here are codes I do have. Power and direction should be universal. Inputs are slightly varied. PT-AE2000 Video \x02IIS:VID\x03 S-Video \x02IIS:SVD\x03 Computer (RBG) \x02IIS:RG1\x03 Component 1 \x02IIS:CP1\x03 Component 2 \x02IIS:CP2\x03 HDMI 1 \x02IIS:HD1\x03 HDMI 2 \x02IIS:HD2\x03 HDMI 3 \x02IIS:HD3\x03 Menu \x02OMN:\x03 UP \x02OCU:\x03 Down \x02OCD:\x03 Right \x02OCR:\x03 Left \x02OCL:\x03 Return \x02OBK:\x03 Enter \x02OEN:\x03 _____________________________ Additionally with the Codes above: PT-AE4000 Lens \x02OLE:\x03 Factory Default \x02OST:\x03 SubMenu \x02OSM:\x03 Viera Link \x02OVL:\x03 _______________________ PT-AE900 (Discrete power and directions are the same) Video \x02IIS:VID\x03 PC \x02IIS:RG1\x03 HDMI \x02IIS:HDM\x03 YPbPr2 \x02IIS:CP2\x03 S-Video \x02IIS:SVD\x03 YPbPr1 (probably bnc/h/v) \x02IIS:YUV\x03 YPbPr1 (probably standard component) \x02IIS:CP1\x03 Shutter Function \x02OSH:\x03 Factory Default \x02OST:\x03
Tell me if these get you anywhere. The AE series has a slightly different command structure for input calls than the AX series. The PT series and PT-D series have completely different commands that are not similar at all. If yours responded to the power commands, we are headed in the right direction. The PT-LB series structures is the same as the AE, so I don't have any other input commands to add.
|
0101001101111001011100110100100101101110011101000110010101100111011100100110000101110100011010010110111101101110 |
|
| Post 6 made on February 10, 2014 at 19:38 |
danieljgor Long Time Member |
Joined: Posts: | December 2008 105 |
|
|
Can Confirm These work for PT-AE100 P-Off \x02POF\x03 P-On \x02PON\x03 Video \x02IIS:VID\x03 PC \x02IIS:RG1\x03 HDMI \x02IIS:HDM\x03 S-Video \x02IIS:SVD\x03
component
\x02IIS:YUV\x03 |
|
| Post 7 made on February 10, 2014 at 19:43 |
danieljgor Long Time Member |
Joined: Posts: | December 2008 105 |
|
|
Now hunting: Picture Mode - Theatre
Picture Mode - Living room
Picture Mode - favourite
Aspect
Picture Adjustment
Color Management
Menu
Return
up
down
left
right
enter
default
freeze
sleep But to be honest no overly fussed as main ones were discrete ON, OFF & HDMi which I now have.... BIG THANKYOU. |
|
| OP | Post 8 made on February 10, 2014 at 21:42 |
SysIntegration Advanced Member |
Joined: Posts: | December 2013 895 |
|
|
On February 10, 2014 at 20:43, danieljgor said...
Now hunting: Picture Mode - Theatre
Picture Mode - Living room
Picture Mode - favourite
Aspect
Picture Adjustment
Color Management
Menu
Return
up
down
left
right
enter
default
freeze
sleep But to be honest no overly fussed as main ones were discrete ON, OFF & HDMi which I now have.... BIG THANKYOU. Did my second posts of directions, menu, and return not work? I have (most) of the others you asked for, but I am going off of --near-- model numbers and not exact. I want to know what I have given you that has worked and not worked so I know what else to post. It'll also help someone in the future. What have you tested and used successfully so far?? Then I will post the rest of my codes. |
0101001101111001011100110100100101101110011101000110010101100111011100100110000101110100011010010110111101101110 |
|
| Post 9 made on February 11, 2014 at 03:58 |
danieljgor Long Time Member |
Joined: Posts: | December 2008 105 |
|
|
Hi Mate, Can confirm only the codes I posted work on the PT-AE100 Thanks |
|
| OP | Post 10 made on February 11, 2014 at 10:02 |
SysIntegration Advanced Member |
Joined: Posts: | December 2013 895 |
|
|
|
0101001101111001011100110100100101101110011101000110010101100111011100100110000101110100011010010110111101101110 |
|
| Post 11 made on February 12, 2014 at 03:38 |
danieljgor Long Time Member |
Joined: Posts: | December 2008 105 |
|
|
Hi MAte, Menu is now working with the removal of semi colon. Menu \x02OMN\x03 |
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
