Your Universal Remote Control Center
RemoteCentral.com
Lighting & Home Control Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Can the IR543 control two light modules on one setting???
This thread has 1 response. Displaying all posts.
Post 1 made on Saturday January 30, 2010 at 00:12
Jasonn B
Long Time Member
Joined:
Posts:
August 2007
37
For ex, say I put a X10 Ws467 light module for my kitchen light and another for my hallway light. Can I set them both to say A1, so they both turn on by one button? Just wondering if this is safe, and how many lighdt could I do this with?
Post 2 made on Saturday January 30, 2010 at 10:21
rehaz1
Active Member
Joined:
Posts:
December 2005
522
On January 30, 2010 at 00:12, Jasonn B said...
For ex, say I put a X10 Ws467 light module for my kitchen light and another for my hallway light. Can I set them both to say A1, so they both turn on by one button? Just wondering if this is safe, and how many lighdt could I do this with?

Yes if both light switchs are set to the same House code and same Unit code you can send one command to turn both lights on at the same time.  You can also create a Sequence to turn on both lights at the same time.  I answered your question in the Harmony remote forum. as rhachey

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse