| Post 1 made on February 10, 2004 at 13:00 |
|
Joined: Posts: | February 2004 2 |
|
|
Does any one know if the X10 house code can be changed? If it can, can you have multiple hose codes copied to different buttons?
|
|
| Post 2 made on February 10, 2004 at 19:42 |
|
Joined: Posts: | December 2001 592 |
|
|
What are you trying to control with the remote? If you are using an IR-543 than that house code is only adjustable on the unit, if you are using an IR-543AH than yes it can
|
|
| OP | Post 3 made on February 11, 2004 at 07:52 |
|
Joined: Posts: | February 2004 2 |
|
|
On 02/10/04 20:42, RWI said... What are you trying to control with the remote?
If you are using an IR-543 than that house code
is only adjustable on the unit, if you are using
an IR-543AH than yes it can I am using an IR-543AH. So how do you change the house code in the remote? |
|
| Post 4 made on February 11, 2004 at 08:16 |
|
Joined: Posts: | October 2001 1,521 |
|
|
On 02/11/04 08:52, X10 Joe said... I am using an IR-543AH. So how do you change the
house code in the remote? The IR543AH is a third-party modified IR543. It uses proprietary codes and requires a programmable remote. I don't think there are any remotes that come with preprogrammed codes for the IR543-AH. The IR543AH will respond to IR543 codes and that's probably what you are seeing. |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
