Post 1 made on Friday February 6, 2004 at 16:28 |
DanG Lurking Member |
Joined: Posts: | February 2004 2 |
|
|
HI, I have a TSU3000 and just started to set up custom pages. I am designing a favorites page for my wife, so she can click on a TV Network icon to go to that channel.
I have Comcast digital cable, so you have to key in 3 digits to get to a channel, e.g. 024 take you to channel 24.
I programmed a button to hit 0 (add .5 second delay), then hit 2(add .5 second delay), then hit 4(add .5 second delay). Once I finish creating a button, I go back to look at the properties and the number have all changed. They change to all 0's or 4's.
Does anyone have any advice on how to fix this?
Thanks in advance.
Dan
|
|
Post 2 made on Sunday February 8, 2004 at 14:54 |
Thor Long Time Member |
Joined: Posts: | December 2003 11 |
|
|
Dan........I also have a TSU 3000(TSU 7000 is on the way)and Comcast Digital Cable,and all I did was link each digit with no delay because the TSU 3000 has a slight pause between commands on it's own.For channels requiring only one or two digits,I just linked the digits I need.........with no delays,and finished with the "Enter" command to make the channel change.Hope this helps.Mike.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.