| Post 1 made on Thursday January 29, 2004 at 06:28 |
milanlad Lurking Member |
Joined:
Posts: | January 2003
8 |
|
|
I recently bought the IR7243W Infra-Red and RF -> X10 unit. I have noticed that when plugged into one particular 13A socket in the lounge, the A1 & A2 switch on the IR724W will not operate the corresponding modules. The other buttons, A3, A4 etc work fine on this 13A socket. However, A1 & A2 on the IR742W do work when plugged into other 13A sockets in the lounge and elsewhere in the house!
Any thoughts on this strange behaviour?
As we all know RF Remotes such as the SR13 or KR22e are set as default to Button 1 for A1, Button 2 for A2, Button 3 for A3 etc.....
This can be changed, for example, button 1 can be set to A5, and therefore button 2 would be for A6, buton 3 would be for A7, and so forth.
What would happen to button 4 on a KR22e if you set button 1 to A14? Button 2 would be for A15, button 3 for A16, and button 4???
Thanks
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
