| Post 1 made on Monday February 16, 2009 at 10:37 |
xrsqswmr Long Time Member |
Joined:
Posts: | January 2009
39 |
|
|
Just upgraded a system to xp-8 had rp-6, was controlling denon 3806 via rs232 some things work but most commands don't, was trying to figure out about the grounding wire that I had with rp-6 and were I could attach it on the xp-8 have tried grounding other place with no luck, any ideas, thanks
|
|
| Post 2 made on Monday February 16, 2009 at 19:58 |
drewski300 Super Member |
Joined:
Posts: | January 2007
3,848 |
|
|
Make sure you have the most current firmware for the XP8. That will fix any delay issues with volume commands. Also since you've converted for a RP6 to a XP8 you probably have the wrong port selected in the command. Go into properties and make sure the command is on the correct port. You shouldn't have to worry about the ground. Try it without the ground.
|
"Just when I thought you couldn't possibly be any dumber, you go and do something like this... and totally redeem yourself!" |
|
| OP | Post 3 made on Tuesday February 17, 2009 at 01:02 |
xrsqswmr Long Time Member |
Joined:
Posts: | January 2009
39 |
|
|
Problem solved, found bad cat5 replaced now working thanks for help
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
