|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | Given RTI T2+ controller without software-- Help!! This thread has 38 replies. Displaying posts 16 through 30. |
|
| Post 16 made on Saturday February 7, 2009 at 22:44 |
nardo1 Active Member |
Joined:
Posts: | April 2005
628 |
|
|
On February 7, 2009 at 10:24, Meatpost said...
RTI and their affiliates are bound for bankruptcy in this
economic environment if they cater only to the rich.
Not many people are gonna spend $500 to program a basic
remote control. RIP RTI -- you had a nice run ripping
people off. You should choose your words carefully. If you can not afford or choose not to pay for a product/service doesn’t mean that it is not legitimate. I take offense to the term rip off. It basically implies that RTI and their dealers are maliciously trying to defraud any consumer with bogus product and services. You could not be further from the truth. I get it; you do not see value in our product or services. I run into this occasionally and I generally do not take offence, but when you use that term it makes me mad. I pride myself on the level of service and commitment that I provide to my clients. I’m confident that our attention to detail is something that big box can only aspire to. To do so would require an increase in their cost structure which would be apparent in the final consumer price… Would you call them a rip off as well at that point? Regardless, move on and find a product that will fit your budget with consumer level servicing. There are a couple options out there.
|
I'll let you know tomorrow.. |
|
| Post 17 made on Sunday February 8, 2009 at 18:31 |
Ernie Bornn-Gilman Yes, That Ernie! |
Joined:
Posts: | December 2001
30,076 |
|
|
I offered via email to program his remote. Of course I'll have to charge!
I haven't heard from that other guy or those other guys. But RTI and URC had too many headaches, and we lost too much decent business, when their software and products were all available to the crowd who would then jam their call centers with "how do you....?"
|
A good answer is easier with a clear question giving the make and model of everything.
"The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw |
|
| Post 18 made on Sunday February 8, 2009 at 19:39 |
Jasonvp Select Member |
Joined:
Posts: | July 2008
2,404 |
|
|
On February 7, 2009 at 10:24, Meatpost said...
RTI and their affiliates are bound for bankruptcy in this
economic environment if they cater only to the rich.
Not many people are gonna spend $500 to program a basic
remote control. RIP RTI -- you had a nice run ripping
people off. Why are you even asking for help when it such a basic remote. What is it with people like you.You get a free remote and still complain! Do you not have job?Does your employer not charge for his services?Do you not get paid for your work?Would you work for nothing? Meatpost you are a DICK! Your Meat needs bashing with a Post!
|
|
| Post 19 made on Sunday February 8, 2009 at 20:34 |
AndyM Founding Member |
Joined:
Posts: | March 2002
1,470 |
|
|
On February 8, 2009 at 19:39, Jasonvp said...
Meatpost you are a DICK!
Your Meat needs bashing with a Post! That pretty much covers it.
|
|
| Post 20 made on Sunday February 8, 2009 at 20:34 |
Ernie Bornn-Gilman Yes, That Ernie! |
Joined:
Posts: | December 2001
30,076 |
|
|
Jason, you may now lighten up. Seriously. And muchly.
He's asking for help because he needs software or an installer to program it. He doesn't want an installer, he's not one so he can't get the software. Them's grounds for whining!
If I got a free remote and couldn't program it, I'd bitch for a while, then use it as a doorstop. A T2+ would make a pretty good doorstop if you shave it down on one end so it will wedge under the door.
|
A good answer is easier with a clear question giving the make and model of everything.
"The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw |
|
| Post 21 made on Sunday February 8, 2009 at 23:20 |
nardo1 Active Member |
Joined:
Posts: | April 2005
628 |
|
|
On February 8, 2009 at 20:34, Ernie Bornn-Gilman said...
Jason, you may now lighten up. Seriously. And muchly.
He's asking for help because he needs software or an installer
to program it. He doesn't want an installer, he's not
one so he can't get the software. Them's grounds for
whining!
If I got a free remote and couldn't program it, I'd bitch
for a while, then use it as a doorstop. A T2+ would make
a pretty good doorstop if you shave it down on one end
so it will wedge under the door. Bitching and whining can be tolerated; making derogatory statements about business practices and products can not!
|
I'll let you know tomorrow.. |
|
| Post 22 made on Monday February 9, 2009 at 00:05 |
cpchillin Select Member |
Joined:
Posts: | September 2007
2,239 |
|
|
On February 7, 2009 at 10:24, Meatpost said...
RTI and their affiliates are bound for bankruptcy in this
economic environment if they cater only to the rich.
Not many people are gonna spend $500 to program a basic
remote control. RIP RTI -- you had a nice run ripping
people off. You do have a point. Look at what has happened to Crestron since they won't give just anyone their software. Their business is tanking almost as bad as our economy. What's worse is that they charge way more then $500 to program a basic remote control. Hah they are bound for bankruptcy. On second thought Meatpost you are a meathead and obviously are just some cheap ass who doesn't want to pay for something that you "got from a friend for free". So who did you steal it from? Or are you a trunk slammer that told a client it was a piece of junk and you put in a Harmony instead? Either way douche you aren't going to get the software so quit your bitching and bone up for a pro to program it or sell it to someone else that will.
|
Who says you can't put 61" plasmas up on cantilever mounts using toggle bolts? <---Thanks Ernie ;) |
|
| Post 23 made on Monday February 9, 2009 at 07:43 |
drobaina Long Time Member |
Joined:
Posts: | December 2007
332 |
|
|
Meat.... I'll give you $50 for it! :)
|
|
| Post 24 made on Monday February 9, 2009 at 13:01 |
Greg C Super Member |
Joined:
Posts: | October 2002
2,574 |
|
|
$ 50.99, but I'll pay for shipping!
|
CEDIA University Designer CAT Team Member
CEDIA University Instructor
CEDIA Registered Outreach Instructor |
|
| Post 25 made on Monday February 9, 2009 at 14:40 |
AndyM Founding Member |
Joined:
Posts: | March 2002
1,470 |
|
|
I'll give you $60.00 for it... and Greg will still pay for the shipping! ;-)
|
|
| Post 26 made on Monday February 9, 2009 at 14:47 |
Strype Advanced Member |
Joined:
Posts: | October 2008
790 |
|
|
I'll give you $45 but i won't laugh at you about this post.
|
Peace - It does not mean to be in a place where there is no noise, trouble or hard work. It means to be in the midst of those things and still be calm in your heart. |
|
| Post 27 made on Monday February 9, 2009 at 15:30 |
anyhomeneeds Super Member |
Joined:
Posts: | December 2007
4,149 |
|
|
You can give me $20 to take it off your hands, an I will keep laughing at you b/c of this post.
|
"You can't fix stupid." |
|
| Post 28 made on Monday February 9, 2009 at 18:01 |
Greg C Super Member |
Joined:
Posts: | October 2002
2,574 |
|
|
On February 9, 2009 at 14:40, AndyM said...
I'll give you $60.00 for it... and Greg will still pay
for the shipping! ;-) Sold! Did the AVAD rep drop off thr RP-1 I owed you?
|
CEDIA University Designer CAT Team Member
CEDIA University Instructor
CEDIA Registered Outreach Instructor |
|
| Post 29 made on Monday February 9, 2009 at 20:51 |
AndyM Founding Member |
Joined:
Posts: | March 2002
1,470 |
|
|
On February 9, 2009 at 18:01, Greg C said...
Sold! Did the AVAD rep drop off thr RP-1 I owed you? He did, thank you.
|
|
| Post 30 made on Monday February 9, 2009 at 22:21 |
cpchillin Select Member |
Joined:
Posts: | September 2007
2,239 |
|
|
I doubt that Meat will even come back. You guys are so mean. haha
Hey Andy can you send me a T3V just to make nice for the whole Pioneer thread? haha
|
Who says you can't put 61" plasmas up on cantilever mounts using toggle bolts? <---Thanks Ernie ;) |
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
