Post 1 made on Wednesday March 16, 2011 at 12:43 |
I purchased a generic MCE remote with included IR adapter for use with XBMC. I used my daughter's RM-AV2500 to learn the commands but I'm having issues with the directional arrows. Holding down the arrow keys on the MCE remote will cause the menus to navigate smoothly and quickly. But I don't get the same response from the learned commands on the AV2500.
For example, holding the left arrow key on the av2500 will only move the menus to the left once regardless of how long I hold it down. Left will only respond again after pressing the right arrow key but again it only moves right once.
I've tried learned the commands by just tapping the MCE remote as well as holding the buttons down. I'm guessing the issue is with the MCE remote and/or IR receiver because I've tried it with a RM-AV3100 as well and I have the same issue.
I was just hoping someone might offer some suggestions on what else I can try before I buy another MCE remote.
Thanks!
|
|
Post 2 made on Wednesday March 16, 2011 at 13:37 |
edmund Elite Member |
Joined: Posts: | April 2002 13,838 |
|
|
do a internet search for MCE and Debounce
|
|
OP | Post 3 made on Thursday March 17, 2011 at 00:36 |
Sweet! Thank you! That worked like a charm.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.