Your Universal Remote Control Center
Sony Remote Controls Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from


RMAV3000T - STR-DB1080 codes, and volume repeat
This thread has 2 replies. Displaying all posts.
Post 1 made on Friday November 28, 2003 at 04:31
Matt Dempsey
Lurking Member
November 2003
The Sony STR-DB1080 was delivered with the RM-LP211 remote, very cool but not learning, hence the RM-AV3000 (did not recognise sony and non sony items)

Are there any codes for the Sony STR-DB1080 receiver. I cannot get any 4xxx series codes on the RM-AV3000 to work the receiver.

In the interim, I have attempted to train the AMP channel to the existing remote, but have little success with getting the Volume to repeat when holding down.
I read the other threads on volume, and could not get it to repeat the signal. (when learning - I tapped, I pressed, and I held down volume on LP211)

I am assuming that if I get the correct code for the AV Receiver, it should also address the vol issue

Thanks for the assistance, and the wealth of info in this forum

BTW - I also cannot find a code that also supports the DVP-C670D DVD 5 Disc changer properly. Cannot get it to change discs.
OP | Post 2 made on Friday November 28, 2003 at 05:05
Matt Dempsey
Lurking Member
November 2003
As a follow-up I applied the AV1/AV2 swap for the
STR-DA4ES/STR-DA7ES Receivers as noted in

(this may be that the DA4ES and DB1080 are the same core unit - different power and QS vs ES componentry)

Now this provides the core functionality as Channel selection (Vid1/DVD/TV etc) and volume is continuous, however a number of the other functions do not work.

I will train for other functions.
Still need to work out the DVD, any suggestions?

This message was edited by Matt Dempsey on 11/28/03 05:20.
Post 3 made on Saturday August 17, 2019 at 19:06
Junior Member
August 2019
I had the same issue, some of the buttons wouldn't repeat but I figured out that once you have taught a command you can't just overwrite it by pressing the learn button again & again, you have to delete the already learned command & teach it again, except this time press & hold down the button on the old remote when teaching it to the RM-AV3000T, it worked for me.

Jump to

Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse