|
|
|
Sony Remote Controls Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Sony TV/Video Macro? (Noob warning)
| |
|
Topic: | Sony TV/Video Macro? (Noob warning) This thread has 6 replies. Displaying all posts. |
|
Post 1 made on Tuesday December 13, 2005 at 13:04 |
carefreefool Long Time Member |
Joined: Posts: | March 2005 55 |
|
|
Just got a RM-VL1000, and it's working great for individual button mapping, and I've been able to duplicate/eliminate the three remotes I had.
I'm getting ready to get my feet wet in macros... currently the family (six people) consults a piece of paper showing the various input/output settings for the TV and HTIB. To achieve these settings on both the TV and the HTIB requires pressing the TV/Video andr Function button until the right setting appears on the display. (e.g. no discretes)
It seems to me it will be impossible to create macros such as "watch TV" or "watch DVD" unless I can either use discretes or force the components into known states so the macro can rotate through the choices a known number of times to land on the desired setting.
It appears discretes are out of the question for this remote. Even if I knew them, I don't know how to get them into the RM-VL1000.
I can't figure out how to get both the TV and the HTIB into a known state. Maybe somebody does?
Thanks,
Norton
|
|
Post 2 made on Wednesday December 14, 2005 at 00:14 |
Ron Aronson Super Member |
Joined: Posts: | June 2002 3,967 |
|
|
Need to know manufacturer and model number of your TV and HTIB, and also any other components you might want to add in.
I can't even start to think of an answer without that information.
|
|
OP | Post 3 made on Wednesday December 14, 2005 at 10:26 |
carefreefool Long Time Member |
Joined: Posts: | March 2005 55 |
|
|
On December 14, 2005 at 00:14, Ron Aronson said...
Need to know manufacturer and model number of your TV and HTIB, and also any other components you might want to add in. HTIB: SONY CDP-C745 TV: SONY KV-36XBR400
|
|
OP | Post 4 made on Wednesday December 14, 2005 at 11:33 |
carefreefool Long Time Member |
Joined: Posts: | March 2005 55 |
|
|
On December 14, 2005 at 10:26, carefreefool said...
HTIB: SONY CDP-C745 Oops - wrong: The correct model number for the HTIB is SONY HCD-S300
|
|
Post 5 made on Wednesday December 14, 2005 at 15:18 |
Ron Aronson Super Member |
Joined: Posts: | June 2002 3,967 |
|
|
The TV is easy. Pressing the channel up/down button or any channel button should get you back to the TV input. Then, you can just make the macro using the correct amount of TV/Video button inputs to get you where you want to go. Remember, your TV probably has the ability to skip inputs you are not using, so take that into account when you make your macro.
The HTIB is harder, and the model number is actually DAV-S300, which is the Dream System, meaning you had to learn everything, right?
I can't make heads or tails out of the manual, so you will have to figure it out for yourself if you can.
The instructions on page 66 for the remote says that the function button #3 selects the component you want to use and refers you to pages 53 and 54, but when I get there I don't see anything that helps me.
If you can figure out how to select the component and get that info into the 1000 you might have a chance of making a macro. It will be easier for you to figure out with the remote and receiver available than it is for me by reading a manual I don't understand.
Good luck and let me know how you make out.
|
|
OP | Post 6 made on Wednesday December 14, 2005 at 16:36 |
carefreefool Long Time Member |
Joined: Posts: | March 2005 55 |
|
|
Ron,
Thank you very much for your time spent on this. I can see now how I can get the TV to the right inputs.
I think I may be able to pull a similar trick on the HTIB. (Yes, I did "learn" the commands for that one) I've noticed there is an IR command (can't remember which one) which forces the unit into AM/FM radio tuner mode. From there, I can do a similar count through the modes to get to the desired one.
If anyone is interested I can post the results.
Thanks again, Ron.
Norton
|
|
OP | Post 7 made on Thursday December 15, 2005 at 09:09 |
carefreefool Long Time Member |
Joined: Posts: | March 2005 55 |
|
|
Using the channel changer to force the TV to a known input state works perfectly. Also, the "Band" function on the HTIB forces it to a known state, allowing me to rotate through Video1, Video2, DVD, etc. as needed depending on my source selection for the macro.
I'm fighting some gremlins - macros that work perfectly seem to fail after I create or edit other macros. I don't know yet if this is due to some changes occuring in the remote, or coincidental randomness in the ability of the remote to control 3-4 different devices with timings, IR noise, etc.
But the original problem is solved and I'm on my way. Thanks again, Ron.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|