|
|
|
The following page was printed from RemoteCentral.com:
Needs Dish Network Codes For Sony RM-V302
| |
|
Topic: | Needs Dish Network Codes For Sony RM-V302 This thread has 14 replies. Displaying all posts. |
|
Post 1 made on Thursday September 15, 2005 at 15:46 |
fa511 Lurking Member |
Joined: Posts: | September 2005 2 |
|
|
I have downloaded the codes from other topics but they only have the codes for direct tv. I need Dish Network Codes. Any help would be appreciated.
|
|
Post 2 made on Thursday September 15, 2005 at 16:42 |
edmund Elite Member |
Joined: Posts: | April 2002 13,839 |
|
|
The code is listed under Express Vu, its 010. Make sure your receiver is set address/unit code #1.
|
|
OP | Post 3 made on Tuesday October 4, 2005 at 20:30 |
fa511 Lurking Member |
Joined: Posts: | September 2005 2 |
|
|
Thanks for the reply but I still cant seem to get this thing program. I have the program steps and the codes, either 010 or 810 down but it still isnt working. Maybe I need the step by step instructions for dummies...any help would be much appreciated bc I am dying here having to get up to change the change the channel. I have the remote programed to the television but the codes just arent workin for my dish network sat.
|
|
Post 4 made on Tuesday October 4, 2005 at 20:54 |
edmund Elite Member |
Joined: Posts: | April 2002 13,839 |
|
|
Your Dish receiver has 16 IR remote addresses, the only one found in ANY universal remote is #1. Check your manual for instructions on how to change addresses.
|
|
Post 5 made on Tuesday October 4, 2005 at 22:42 |
cnoboa Lurking Member |
Joined: Posts: | October 2005 1 |
|
|
hi...i need the code to program an rca tv to the remote
|
|
Post 6 made on Wednesday October 5, 2005 at 09:57 |
Ron Aronson Super Member |
Joined: Posts: | June 2002 3,967 |
|
|
On 10/04/05 22:42 ET, cnoboa said...
hi...i need the code to program an rca tv to the remote Click here to get the manual and codes for your Sony RM-V302 remote, then click on Get File, and Then Save. Then you can look up the code in the Code List.
|
|
Post 7 made on Friday November 25, 2005 at 18:40 |
bigjim106x Lurking Member |
Joined: Posts: | November 2005 2 |
|
|
How does one go about checking that setting?
|
|
Post 8 made on Friday November 25, 2005 at 21:15 |
bigjim106x Lurking Member |
Joined: Posts: | November 2005 2 |
|
|
On September 15, 2005 at 16:42, edmund said...
The code is listed under Express Vu, its 010. Make sure your receiver is set address/unit code #1. That is the code to which I was referring
|
|
Post 9 made on Sunday November 27, 2005 at 20:14 |
ricehead Lurking Member |
Joined: Posts: | November 2005 3 |
|
|
help..i need codes for sony trinitron to work with this remote.. i never received the yellow paper with codes
|
|
Post 10 made on Sunday November 27, 2005 at 20:15 |
ricehead Lurking Member |
Joined: Posts: | November 2005 3 |
|
|
i need the codes/codes for a sony trinitron to work with this remote, pls..
the tv is approx 7 yrs old
|
|
Post 11 made on Monday November 28, 2005 at 08:41 |
Ron Aronson Super Member |
Joined: Posts: | June 2002 3,967 |
|
|
On November 27, 2005 at 20:15, ricehead said...
i need the codes/codes for a sony trinitron to work with this remote, pls..
the tv is approx 7 yrs old Go to post #6 above, click on the link, and you will get the manual and code list. The code list shows the code for Sony TV is 001.
|
|
Post 12 made on Monday November 28, 2005 at 11:08 |
stevegamble Lurking Member |
Joined: Posts: | November 2005 4 |
|
|
On September 15, 2005 at 16:42, edmund said...
The code is listed under Express Vu, its 010. Make sure your receiver is set address/unit code #1.
|
|
Post 13 made on Monday November 28, 2005 at 11:12 |
stevegamble Lurking Member |
Joined: Posts: | November 2005 4 |
|
|
On September 15, 2005 at 16:42, edmund said...
The code is listed under Express Vu, its 010. Make sure your receiver is set address/unit code #1. I have a problem also prgramming my remote for Bell Expressview...I tried on two machines , I have. I set my remote adress to #1 even tried rebooting my receiver , then double check that I am still on remote address #1.. yep. still no luck....programs easy for all other units I have. held codes for 24hours with no batteries in it.
|
|
Post 14 made on Monday November 28, 2005 at 11:17 |
stevegamble Lurking Member |
Joined: Posts: | November 2005 4 |
|
|
On October 4, 2005 at 20:54, edmund said...
Your Dish receiver has 16 IR remote addresses, the only one found in ANY universal remote is #1. Check your manual for instructions on how to change addresses. I too have this problem , only I know how to change my remote address to #1.. It still doesn't help...any other suggestions ? I am using code 010..expressview 3700 model. I also have a PVR5900 and it won't work there either.
|
|
Post 15 made on Monday November 28, 2005 at 12:02 |
stevegamble Lurking Member |
Joined: Posts: | November 2005 4 |
|
|
On October 4, 2005 at 20:30, fa511 said...
Thanks for the reply but I still cant seem to get this thing program. I have the program steps and the codes, either 010 or 810 down but it still isnt working. Maybe I need the step by step instructions for dummies...any help would be much appreciated bc I am dying here having to get up to change the change the channel. I have the remote programed to the television but the codes just arent workin for my dish network sat. [Link: esupport.sony.com]Try this Link...I just did and it worked...there is a tutorial that is really good. you have to push the little s and power button , then cbl/sat then the stop button , then the number three 3 button,..then enter button. that sets it up fro satelite... then program the code as you did before with codes 010 should work , it did for me. not in the istructions though.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|