| Post 1 made on Friday January 3, 2003 at 15:53 |
Stcuk Lurking Member |
Joined:
Posts: | January 2003
4 |
|
|
I just received a SONY RM-VL1000. For some reason, the codes for the SONY STR-DE685 AMP won't work at all. I've tried various codes and the same thing happens: Nothing.
Any suggestions would be helpful.
|
|
| Post 2 made on Friday January 3, 2003 at 15:59 |
k wolf Lurking Member |
Joined:
Posts: | January 2003
8 |
|
|
I have an AV3000 remote with the same receiver. Set the receiver and your original remote to AV1 (Under Settings on the receiver and Use Mode + AV1 on the remote), and you should be able to program and use the VL1000. Sony defaults it to AV2
I read this off another thread, so can't take credit for the solution.
|
|
| Post 3 made on Saturday January 4, 2003 at 14:36 |
Daniel Tonks Wrangler of Remotes |
Joined:
Posts: | October 1998
28,758 |
|
|
I can understand why Sony would add a second control set, but I can't for the life of me figure out why they'd make it the default.
|
|
| Post 4 made on Saturday January 11, 2003 at 13:27 |
Shane White Lurking Member |
Joined:
Posts: | January 2003
1 |
|
|
This also worked for my STR-985 with my RM-2100 remote control. Thank you. I found this default very annoying too. I wonder what they thought the advantage was.
|
|
| Post 5 made on Wednesday April 6, 2016 at 20:28 |
Ok, what then was the code that worked? Then entire thread never mentions the code!
I bought a Sony RM-VZ220 remote that expected would work on my STR-DE685 Sony Receiver but every code I try has no effect.
Help from anyone appreciated
|
Me? |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
