 |
 |
|
|
Sony Remote Controls Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
"ALL OFF" macro for the RM-AV3000
| |
|
| Topic: | "ALL OFF" macro for the RM-AV3000 This thread has 6 replies. Displaying all posts. |
|
| Post 1 made on Monday August 5, 2002 at 13:58 |
Scott Cannerz Lurking Member |
Joined:
Posts: | August 2002
4 |
|
|
System Control #1 turns every SONY component off, but I have other manufacturer's components too. So, I'd like to reprogram this "ALL OFF" macro. BUT, I've had no luck DELETING or RESETTING this macro.
Any ideas? TIA,
Scott.
|
|
| Post 2 made on Wednesday August 14, 2002 at 02:43 |
Daniel Tonks Wrangler of Remotes |
Joined:
Posts: | October 1998
28,766 |
|
|
You must delete the macro in macro recording mode, you can't "reset" it, since that resets it back to the factory default.
|
|
| Post 3 made on Wednesday August 14, 2002 at 16:54 |
docdave Lurking Member |
Joined:
Posts: | August 2002
1 |
|
|
Spoke with Sony. Got a quick response that works.
Press Commander off and Muting. Then press flashing "system" key. Then, press the "DEL" key at the same time as the button you want to clear. The timing of this is a bit critical - keep trying it til you get a longer beep. I erased the presets on System 1 and System 3, no problem.
|
|
| Post 4 made on Wednesday August 14, 2002 at 17:44 |
Daniel Tonks Wrangler of Remotes |
Joined:
Posts: | October 1998
28,766 |
|
|
Timing should't be a problem, simply hold DEL and press the button to reset.
|
|
| Post 5 made on Wednesday September 4, 2002 at 20:36 |
msmithe Lurking Member |
Joined:
Posts: | September 2002
8 |
|
|
Great Info guys. I love this site! I just purchased the sony 3000 and the ponto 2000 (one for the bedroom and one for living room. The pronto would not control my Yamaha receiver nor my Motorola digital cable box (I tried all the codes). The sony controls everything without learning each component separately. The only thing was that I was not able to reprogram the macros for sys 1 and sys 2 buttons(because the manual is wrong). But thanks to this board I got the right info and now have it up and running. I do have one question that I will post elsewhere new, (in case it gets buried here).
Can you re-label the soft LCD buttons under a component on the sony 3000? For example, on my Yamaha receiver when you touch the phono button it actually switches to the vcr input on the Yamaha. This is ok since I don't just the phono input but it would be better if I could re-label the button to say vcr instead of phono. No other button actives the vcr input so its use phono or custom program a vcr input and hide the phono button. Unless someone knows of a better way?
Thanks in advance
|
|
| Post 6 made on Thursday September 5, 2002 at 15:29 |
tmsron Lurking Member |
Joined:
Posts: | September 2002
3 |
|
|
My Yamaha receiver remote has a seperate button for power on and power off. Is there a way to incorporate both of these functions into the amp Power On LCD button on the AV3000?
|
|
| Post 7 made on Thursday September 5, 2002 at 22:09 |
Jmpage2 Lurking Member |
Joined:
Posts: | September 2002
4 |
|
|
This was just the info I was searching for. Thanks!
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
