| Post 1 made on Monday March 26, 2001 at 11:22 |
John Hicks Historic Forum Post |
|
|
Does anyone know the Frequency of the Sony two way remote?
|
|
| OP | Post 2 made on Tuesday March 27, 2001 at 12:09 |
I have sen it mentioned in passing as being 455kHz but cannot confirm this.
If you find out for sure, please let everyone know. Also I would like to know what format the messages are in - standard SIRCS, but for the frequency, I hope!
Peter
|
|
| OP | Post 3 made on Friday March 30, 2001 at 03:11 |
Daniel Tonks Historic Forum Post |
|
|
From the remote to the receiver is normal 40kHz, but I'm not sure what it is back from the receiver.
|
|
| OP | Post 4 made on Tuesday April 3, 2001 at 08:55 |
I would expect that most of the buttons (e.g. Play, Pause,...) would be sent as normal 40kHz SIRCS commands (either Sony 12, 15 or 20 bit signals).
However, what frequency are the following "commands" sent at for a CD changer:
Play a Disc (from the scrollable list) Pick a Artist (from the scrollable list) Pick a Group (from the scrollable list)
There are probably equivalent examples for the two-way remotes for the Amps.
If you could let me know what format these IR commands are in I would be gratefull.
I believe these commands are "different", because these will be passed on down the s-link wire using the Control A1 protocol. e.g. Send the IR to a Sony Amp, it should be passed along the S-Link Control A1 wire to the CD Changer.
Peter
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.