| Post 1 made on Tuesday March 20, 2001 at 19:23 |
I am using the RM-VL900 and have a Pioneer DV-C503 5 disc DVD/CD player. The Pioneer remote has the usually number keys; in addition it has 5 buttons 1-5 to change the DVD or CD being played. Is there a way to program the VL 900 to change to a different DVD/CD and also use the number keys to go to jump to the different tracks on a CD?
Thanks
|
|
| OP | Post 2 made on Wednesday March 21, 2001 at 16:39 |
Daniel Tonks Historic Forum Post |
|
|
No, you can't have two signals on one button... they'll need their own keys.
|
|
| OP | Post 3 made on Friday March 23, 2001 at 12:27 |
Check under the Technical/User Tips section. It talks about using Deck B/A component to do this. Looks like you'd have to toggle between A and B to do this but at least the functions are under the same Component. You can reassign a component to another button but the owner's manual says that if you copy the Deck B/A over to another component it will only operate Deck B so thats some bad news. There may be a workaround. You might check some past postings to see specifics too. I just got my 2100 and am still learning about it.
Good luck.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
