Nevermind, I found it another link from a different thread on this site. Thanks.

Hello,
I have the CL014 and I am using it on a Sharp DVD player and I am trying to turn captions off but everytime I hit the button it keeps cycling through 1,2,3 but not off. What is the trick for turning them off. Like do I have to push the subtitle button and then push up or something? Can someone explain to me what the blue letters on the remote do?

I have the same remote. What is the actual model number for this remote and what is the tip that helped you program it?

Thanks

The Instruction Manual for the PMDVD6, in PDF format, can be found on RemoteCentral.com. I printed mine out, after finding it (and this thread) during a Google search. Codes are listed.

[Link: remotecentral.com]

Curious fact ... I have a PMDVD6, and CL015 is also inside my battery compartment.

this site has reprogramminginstructions & codes

hey guys this is the link for the instruction and codes for the Philips Magnavox remote control, in the battery compartment it says CL014 and on the other side it says 32/03 and someone on this thread said that the cl014 remote was actually the pm335 so i searched it and found it and my remote works now wuhu! Hope it helps

[Link: universal-remote.net]

i have a philips universal and need to find a code for my cl015 to control my samsung direct tv reciever. any help? [email protected]

Re: Post 8 Chelle something or other.

I tried this link and several variations of it. The link is dead. This web site no longer exists. (http://www.philips-magnavox-remote-control-codes.com/)

I wish we would look at the post/reply threads in order not just individually as they are posted. It makes it hard to reference the replies. We have to watch the dates of the postings because web sites come and go.

POST 10 - microdoll wrote:
March 2005

"Philips Magnavox Universal Remotes models cl013, cl014, & cl015 are actually manufactured my Gemini Industries. The codes for all of these remotes are at: [Link: gemini-usa.com] It's in PDF form so you need to have Adobe Acrobat Reader installed."

Mrfixit01 posted in response:
I have tried this link and variations of it.
There is no active web site at this location.
It returns "This domain is for sale."

See my next post for an active link as of March '07.

[Link: universal-remote.net]

This link worked for me. My Philips Magnavox (CL010) was set up within 5 minutes using these instructions and codes. There appears to be links for other models and brands on this site as well. Thanks to RIA for this post.

I have a PM335 Remote according to Amazon, but every instruction and code manual I bring up has a picture of the wrong remote. Also, the codes are 3 digits long while I specifically remember the original codes being 4 digits long. I'm trying to get the remote to work with the DVD component of a DVD/VCR combination. Right now, no matter what I press under the VCR/DVD button where I first programmed it, it only controls the VCR part. I can switch between the two parts just fine, it's just that when I hit play or any other command button, the VCR is the part that always gets the message. I'm guessing that I need to program the DVD part to SAT/CBL button, but for that I need the right set of codes. Does anyone have the set of codes that can help me?

Here's a link to amazon showing a picture of exactly the type of remote I have.
[Link: amazon.com]

Oh, an upon further web surfing, I found that the specific remote code is PM335B. I can't find a code source anywhere on the internet though.