| Post 1 made on Sunday December 22, 2002 at 09:41 |
mk27 Lurking Member |
Joined:
Posts: | December 2002
1 |
|
|
I am looking for a remote that allows me to program
two functions into any button as I need to control two satellite receivers at once (receiver 1 controls the satellite dish position and polarization skew and receiver 2 is the actual digital receiver). So if I press the "next channel" button, receiver 1 needs to be told to go to the next program to adjust the dish position and receiver 2 needs to be told to adjust the frequency for the next channel. Similarly if I want to watch e.g. channel 56, both receivers need to be told so that dish position and frequency are adjusted for channel 56. I know there are tons of (rather expensive) remotes out there that allow me to use 300+ macros, so in theory that would do, but I would rather use the "normal" buttons than the special "macro" buttons.
Also I would rather spend 100USD than 400USD :-)
Thanks
|
|
| Post 2 made on Sunday December 22, 2002 at 15:25 |
The Robman Loyal Member |
Joined:
Posts: | August 2001
6,218 |
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
