| Post 1 made on Wednesday October 9, 2002 at 19:32 |
baur Lurking Member |
Joined:
Posts: | October 2002
1 |
|
|
Hey!
Can someone tell me how to program a philips remote with codes? I dont remember if I had to press and hold Menu and type the code or whatever, tryed the most. It probably will be the same for the most Philips unitts, but to be specific I have a SBC RU620. Eternal thanks to the first person who solves my problem.
|
|
| Post 2 made on Wednesday October 9, 2002 at 20:05 |
jamesgammel Founding Member |
Joined:
Posts: | March 2002
1,152 |
|
|
check your manual or was that used to line the birdcage? ;)
|
|
| Post 3 made on Wednesday October 16, 2002 at 19:43 |
alfaman Founding Member |
Joined:
Posts: | November 2001
145 |
|
|
On some Philips remotes, you press and hold the digits "1" and "3" (together) for three seconds to get into the programming mode. Don't know if the RU620 is one of them, but try that. If the LED turns on and stays on after three seconds that's it, release the two keys and punch in your setup code number while the LED is lit.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
