Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto NG Family Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Marantz RC9500 USB driver?
This thread has 7 replies. Displaying all posts.
Post 1 made on Thursday May 3, 2018 at 12:51
ronniefree
Lurking Member
Joined:
Posts:
May 2018
6
I have been using WIzz.it 9 with two RC9500's for years flawlessly. One of my RC9500's died and I bough a used one from eBay which works but I cannot get it to download/upload with the Wizz.it 9.
My current RC9500's are running Boot V4.31 and App V3.10.5. My new RC9500 is running Boot V3.75 and App V3.2.17.
I tried a firmware update but again can't communicate with the RC9500.

I suspect that a different USB driver was used with the older boot/app. Any ideas?
Ronnie Free
Post 2 made on Thursday May 3, 2018 at 19:27
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,992
Welcome to the site.

To make it easier for users to search, please refrain from double-posts.

The USB driver for the 9500 should not have changed. Should be same across all firmware revisions.

I would suggest connecting USB cable directly to remote (don't go through docking station) and powering the remote up while connected to computer with firmware update program running and waiting to detect the remove. Hopefully, firmware process will detect the unit.

You also did not mention if you've upgraded PC's recently such as moving from a 32 bit to a 64 bit OS. What OS are you using as well?
Lyndel McGee
Philips Pronto Addict/Beta Tester
OP | Post 3 made on Friday May 4, 2018 at 18:46
ronniefree
Lurking Member
Joined:
Posts:
May 2018
6
I have a laptop and desktop which are 64-bit units and which are setup with Wizz.it. I activate the Windows XP Virtual Mode on both to upload/download. Nothing has changed in either machine, and both function 100% with my old two remotes.

I now have a second used Remote that has the same issue and is running the same version as the first used one I just got (V3.2.17)
.
The Firmware Update program will sometimes read the Remote's version and acknowledge the version it intends to update to (V3.10.5). But, it gets stuck on "Downloading Firmware".

I am running the Firmware Updater from the XP Virtual Mode. The 3.10.5 Firmware Updater is dated 4/7/2006.
Ronnie Free
OP | Post 4 made on Friday May 4, 2018 at 19:41
ronniefree
Lurking Member
Joined:
Posts:
May 2018
6
Some additional info ... the Updater gets stuck on "Downloading Firmware" , and if I answer 'NO" to keep the current configuration also "Downloading Default Configuration File". Appears that the Updater is trying to connect with a source for these files.
Ronnie Free
Post 5 made on Saturday May 5, 2018 at 11:40
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,992
Do you have a complete install of Wizz-it? I would suggest reinstalling at IIRC, on the NG series, the default configurations were in a folder off the main install folder.

If this is the case, a firmware update to your other remotes (if you chose to reload the default config) should also fail.

Lyndel
Lyndel McGee
Philips Pronto Addict/Beta Tester
OP | Post 6 made on Saturday May 5, 2018 at 11:48
ronniefree
Lurking Member
Joined:
Posts:
May 2018
6
What is IIRC ? What is NG?
Ronnie Free
OP | Post 7 made on Saturday May 5, 2018 at 12:11
ronniefree
Lurking Member
Joined:
Posts:
May 2018
6
SUCCESS! I downloaded the default Configuration file from the Marantz site and placed in the Configurations folder. Was then able to update the Firmware and My custom Configurations to both unites.
Thanks for the guidance.
Ronnie Free
Post 8 made on Wednesday May 9, 2018 at 16:03
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,992
Ronnie. Glad you are up and running!!!

IIRC - If I Recall Correctly.

NG - Next Generation. The TSU7000/7500 RC9500 were considered Pronto Pro Next Generation remotes. You will often see the software called PENG (ProntoEdit Next Generation) PPENG (ProntoProEdit Next Generation).
Lyndel McGee
Philips Pronto Addict/Beta Tester


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse