Post 1 made on Tuesday March 11, 2014 at 12:50 |
mapatton Long Time Member |
Joined: Posts: | January 2005 103 |
|
|
Anyone have knowledge or an idea on a fix?
|
Mark Sony XBR5 / Pioneer Elite VSX-94THX / Panasonic DMP-BD30 / Toshiba HD-35A / Pioneer Elite DV-48AV / SqueezeBox 3 / SA 8300HD / all with a Pronto TSU7000 |
|
OP | Post 2 made on Tuesday March 11, 2014 at 12:52 |
mapatton Long Time Member |
Joined: Posts: | January 2005 103 |
|
|
They all wentout at the same time basically. Could it be only one is stuck and that is causing the issue?
|
Mark Sony XBR5 / Pioneer Elite VSX-94THX / Panasonic DMP-BD30 / Toshiba HD-35A / Pioneer Elite DV-48AV / SqueezeBox 3 / SA 8300HD / all with a Pronto TSU7000 |
|
Post 3 made on Tuesday March 11, 2014 at 21:25 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,996 |
|
|
Could be. Basically, the hard buttons (with exception of cursor) are controlled by metal discs on an ElectoLuminescent panel. You might find that one is stuck.
There are instructions on how to disassemble in threads here. I believe search topic is "Replace 7000 Screen".
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
OP | Post 4 made on Wednesday March 12, 2014 at 20:34 |
mapatton Long Time Member |
Joined: Posts: | January 2005 103 |
|
|
OK followed that and cleaned everything. Now put back together I have no screen display. I am 99.99% positive I did not damager anything. I am unsure if I have the small width ribbon inserted far enough. Tried a few times and when locked, half of the white is showing. Would that cause no display?
|
Mark Sony XBR5 / Pioneer Elite VSX-94THX / Panasonic DMP-BD30 / Toshiba HD-35A / Pioneer Elite DV-48AV / SqueezeBox 3 / SA 8300HD / all with a Pronto TSU7000 |
|
Post 5 made on Friday March 14, 2014 at 08:48 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,996 |
|
|
Check the ribbon cable again. Must not be seated all the way. Note that there are 2 cables. One controls the touch screen. Are you sure screen is off? Or is it that the backlight is not working?
Lyndel
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
OP | Post 6 made on Tuesday March 25, 2014 at 16:51 |
mapatton Long Time Member |
Joined: Posts: | January 2005 103 |
|
|
Unknown. What could cause the backscreen to not work? It was working before.
|
Mark Sony XBR5 / Pioneer Elite VSX-94THX / Panasonic DMP-BD30 / Toshiba HD-35A / Pioneer Elite DV-48AV / SqueezeBox 3 / SA 8300HD / all with a Pronto TSU7000 |
|
Post 7 made on Thursday March 27, 2014 at 22:54 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,996 |
|
|
There is a little coil on the board. Looks like an iron core with wire wrapped around it. That is the voltage inverter coil if I remember correctly. Maybe you dislodged it?
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
OP | Post 8 made on Friday March 28, 2014 at 10:51 |
mapatton Long Time Member |
Joined: Posts: | January 2005 103 |
|
|
I will open it back up and check.
|
Mark Sony XBR5 / Pioneer Elite VSX-94THX / Panasonic DMP-BD30 / Toshiba HD-35A / Pioneer Elite DV-48AV / SqueezeBox 3 / SA 8300HD / all with a Pronto TSU7000 |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.