Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto NG Family Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 2 of 3
Topic:
Discrete on/off codes for Cambridge Audio 640R and DVD players
This thread has 34 replies. Displaying posts 16 through 30.
OP | Post 16 made on Wednesday March 17, 2010 at 15:12
Kefci2000
Lurking Member
Joined:
Posts:
June 2009
9
Thanks Jason, Didnt see the hex generator thread.
OP | Post 17 made on Wednesday March 17, 2010 at 16:01
Kefci2000
Lurking Member
Joined:
Posts:
June 2009
9
Sorry Jason,

Could you please display the hex codes for discrete on and off for the 650BD

Cambridge said these of the NEC codes but they are too long for hex generator
650BD
NEC code
Standby Toggle Command – 49 B6 04 FB (Single press)
Standby ON Command – 49 B6 13 EC
Standby OFF Command – 49 B6 1A E5

Thanks again
Post 18 made on Wednesday March 17, 2010 at 20:40
Jasonvp
Select Member
Joined:
Posts:
July 2008
2,404
Standby Toggle Command – 49 B6 04 FB (Single press)
Enter in Hex Generator 49 04 or 49B6 04FB
0000 006D 0022 0002 0155 00AA 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 05ED 0155 0055 0015 0E47

Standby ON Command – 49 B6 13 EC
49 13 or 49B6 13EC
0000 006D 0022 0002 0155 00AA 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 05ED 0155 0055 0015 0E47

Standby OFF Command – 49 B6 1A E5
49 1A or 49B6 1AE5
0000 006D 0022 0002 0155 00AA 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 05ED 0155 0055 0015 0E47
OP | Post 19 made on Wednesday March 17, 2010 at 22:10
Kefci2000
Lurking Member
Joined:
Posts:
June 2009
9
Thanks again Jason, couldn't quite work out the generator, kept saying to many characters.
Post 20 made on Thursday March 18, 2010 at 01:31
Jasonvp
Select Member
Joined:
Posts:
July 2008
2,404
Did you get the 650R codes to work ok?
OP | Post 21 made on Thursday March 18, 2010 at 05:48
Kefci2000
Lurking Member
Joined:
Posts:
June 2009
9
Yes thanks a lot for your help Jason, beginning to understand the R5 vs hex vs NEC

Just need to get "Blu ray to automatically go to HDMI as it defaulting to Analogue direct when I switch via the Marantz remote

Peter
Post 22 made on Thursday March 18, 2010 at 07:18
Jasonvp
Select Member
Joined:
Posts:
July 2008
2,404
Have you assigned the HDMI Input to the correct Source Input in the OSD?

See page 17 of manual.

Azur 650R User's Manual - English

Cheers
Jason
OP | Post 23 made on Thursday March 18, 2010 at 08:00
Kefci2000
Lurking Member
Joined:
Posts:
June 2009
9
Yep all good there, it just seems to jump to stereo mode.

Have put a delay and then "digital" and then "audio direct" which takes it back to HDMI

All works now, but would be very painful without the Marantz/Pronto equiv
Post 24 made on Thursday March 18, 2010 at 08:47
Jasonvp
Select Member
Joined:
Posts:
July 2008
2,404
Seems odd you have to do that.

Have you contacted your Dealer or Cambridge about it?
OP | Post 25 made on Thursday March 18, 2010 at 15:43
Kefci2000
Lurking Member
Joined:
Posts:
June 2009
9
I think it might be because of the way the remote works (eg Mute on and mute off are different codes, but same button)
Post 26 made on Thursday October 6, 2011 at 11:45
Swampfox
Lurking Member
Joined:
Posts:
October 2011
2
Greetings,

Here's the deal, I'm in dire need of discrete ON/OFF IR codes for the
Cambridge 751BD. I can't do the RS232 and the IR code sheet from the Cambridge website only has the toggle "standby" command.

I really need the raw HEX codes for discrete ON/OFF. I assume the 650BD codes will also work for the 751BD. Either way, any help is greatly appreciated!
Post 27 made on Thursday October 6, 2011 at 12:05
Jasonvp
Select Member
Joined:
Posts:
July 2008
2,404
Yes they are the same as Post 18.
Post 28 made on Friday October 7, 2011 at 10:49
Swampfox
Lurking Member
Joined:
Posts:
October 2011
2
Jason, they do work. Thank you very much!
Post 29 made on Friday August 9, 2019 at 09:44
RickDeckard
Long Time Member
Joined:
Posts:
November 2011
12
Hi, some one has a copy of the 650BD_IR_Codes.pdf document?
Thanks
Post 30 made on Friday August 9, 2019 at 17:07
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
13,086
Hey Rick,

Not sure if JasonVP is still around but you might send him RC Mail. You just resurrected a thread that is 8 years old.

I went to the cambridge audio support site and looked up support for current blu ray players and they are under the CXU umbrella.

Here's a PDF I found.

[Link: techsupport.cambridgeaudio.com]

The codes in this PDF match the ones posted by JasonVP above (shorthand NEC format).
Lyndel McGee
Philips Pronto Addict/Beta Tester
Page 2 of 3


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse