| Post 1 made on Wednesday April 5, 2006 at 18:33 |
glendagary Founding Member |
Joined:
Posts: | November 2001
133 |
|
|
In the Gallary section of Pronto Edit there are rectangular shaped panels that are "transparent" and you mainly use them (I guess) for lables. I've made buttons with them....and attached actions to these buttons. Everything looks normal...but they don't work. When I generate artwork and load to RELEASED side of button it works. I was hoping to use the transparant button with just labeling and no artwork in the hope of using less memory. Ideas / Remarks? Thanks.
|
|
| Post 2 made on Wednesday April 5, 2006 at 18:46 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
They are meant to be for labels not buttons.
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
| Post 3 made on Wednesday April 5, 2006 at 21:40 |
Lyndel McGee RC Moderator |
Joined:
Posts: | August 2001
13,060 |
|
|
Gary,
If you have Paintshop or some other advanced image editor, create a 2-layer file and on the 2nd layer, paint the entire area solid white. Then, in the layer properties, set the visibility to 1%. Export a PNG and then load the PNG in a button. As a result of doing this, any area that is not fully transparent will respond to a press but will not be visible to the naked eye.
|
Lyndel McGee
Philips Pronto Addict/Beta Tester
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
