Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto NG Family Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
TSU 7500 unable to control plasma TV inputs in macro
This thread has 8 replies. Displaying all posts.
Post 1 made on Monday February 27, 2006 at 14:49
smouradian
Long Time Member
Joined:
Posts:
February 2006
14
Hi
I need some help.
I have a Pioneer Pro 1130HD plasma screen. My Pioneer remote has separate buttons for input 1 through input 4. I have learned these IR codes into my Pronto TSU 7500 and they work independently. However, whenever I include these inputes in a macro, they do not work. I have tried to extend the delays on both ends of the input by up to 15-seconds and still they wont change. Everything else in y macro works.

When I turn TV on with macro I want Pioneer input to go to #3. When I want to watch a DVD I want input to go to #1.

Anyone have any idea why they wont switch for me?

Thanks.
Post 2 made on Monday February 27, 2006 at 15:23
Peter Dewildt
Loyal Member
Joined:
Posts:
July 2001
6,307
You most likely will need to increase the duration for each code.
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400
Post 3 made on Monday February 27, 2006 at 16:59
Damik
Loyal Member
Joined:
Posts:
October 2005
6,203
I had a similar problem with a Pioneer Receiver, increasing the duration of the code as Peter Dewildt says fixed the problem for me.

Last edited by Damik on February 28, 2006 16:11.
I knew this was a mistake; my grip on reality's not too good at the best of times. Glitz, in "The Ultimate Foe"
OP | Post 4 made on Monday February 27, 2006 at 17:23
smouradian
Long Time Member
Joined:
Posts:
February 2006
14
When you say increase the duration of the code, do you mean to increase the delay period between IR codes in a macro?
Post 5 made on Monday February 27, 2006 at 18:34
roddymcg
Loyal Member
Joined:
Posts:
September 2003
6,796
Have you switched something to RF by chance, Just did a 7500 with a P.E. Palsma and receiver. The only duration I had to mess with was the volume ramping.

Sometimes I erase all the functions in a macro and start over when I am having problem and that has helped out. This was all the Pronto units, not specically the 7500.

When they are referring to the duration, double click a button, double click on the the learnt IR and you will see the duration adjustments, default or whatever you choose. I think I used .3 seconds for volume issues.

Last edited by roddymcg on February 27, 2006 19:20.
When good enough is not good enough.
Post 6 made on Monday February 27, 2006 at 18:40
Lowpro
Select Member
Joined:
Posts:
March 2004
2,081
On February 27, 2006 at 17:23, smouradian said...
When you say increase the duration of the code,
do you mean to increase the delay period between
IR codes in a macro?

No. What is being suggested is that you increase the duration of the IR codes themselves. Duration meaning how long each IR code is set to transmit. This can not be done via delay actions in a macro. To do this go to the buttons in which you learned the IR codes to, and double click on the learned IR code in the action list for each. This will bring up a window showing among other things, the IR duration. There you can change the IR duration for that particular IR code from the default setting to anywhere between .01 and 10 seconds.

The number IR codes for my Comcast DVR for instance do not faithfully execute when used in macros for my channel icons. It is very hit or miss. By adding a .15 second duration to each of the IR codes my channel macros now execute perfectly everytime. Very quickly in fact. If your codes work individually, but not in a macro this is most certainly what you need to do.

Last edited by Lowpro on February 28, 2006 12:11.
LP Related Links:
View my profile to access various
links to key posts and downloads.
OP | Post 7 made on Tuesday February 28, 2006 at 10:09
smouradian
Long Time Member
Joined:
Posts:
February 2006
14
Thanks all
All macros now work perfectly!!!!!!!!!!!!!!!1
Post 8 made on Tuesday February 28, 2006 at 13:42
wjjz106
Long Time Member
Joined:
Posts:
September 2005
268
On February 27, 2006 at 18:40, Lowpro said...

The number IR codes for my Comcast DVR for instance
do not faithfully execute when used in macros
for my channel icons. It is very hit or miss.
By adding a .15 second duration to each of the
IR codes my channel macros now execute perfectly
everytime. Very quickly in fact.

Lowpro -

Thank you for that bit of information. I have adjusted the duration and the improvement is like night and day.

Some trader inside information - it was there all along, all I had to do was activate the minimum :-).

- wjjz106
DVD 12 Step Member
[Link: invelos.com]
Post 9 made on Tuesday February 28, 2006 at 13:48
Lowpro
Select Member
Joined:
Posts:
March 2004
2,081
It sure is like night and day huh. Those channel macros seem to run twice as fast now and perfectly everytime. That was the only frustrating thing about the Comcast box that was bothering me. Living large now! I actually gave all the IR codes for my Comcast box the .15 duration. Seemed to make a big difference across the board really.
LP Related Links:
View my profile to access various
links to key posts and downloads.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse