| Post 1 made on Tuesday September 27, 2005 at 02:48 |
Charneyw Long Time Member |
Joined:
Posts: | August 2004
14 |
|
|
Hello
Using a TSU3000 and RFX6000... Learned the direct buttons (1-9 etc...) for an older Sony DSS receiver model A1. After Learning the codes, directly entering a channel for example pressing 1 then, 2 then, 5 for channel 125 does not always work. Typically one of the numerics is missed by the receiver when pressed manually. For example, when pressing 1, 2, 5 for channel 125, I get channel 15 because it missed the button press for "2". Any help..thanks Agaion I am using the RF extender for this device as well
|
|
| Post 2 made on Tuesday September 27, 2005 at 03:20 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
You need to put delays between the digits.
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
| OP | Post 3 made on Tuesday September 27, 2005 at 10:31 |
Charneyw Long Time Member |
Joined:
Posts: | August 2004
14 |
|
|
The problem I am having is not related to changing a channel in macro. It is while manually pressing the numeric buttons. The buttons are not accurate every time
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
