Hello,

Property me last Saturday a new LCD TV bought, makes fun correct. Now the remote maintenance wanted to build
into my Pronto Ru-950. In the guidance I see which I unite instructions not like that on orginal the remote
maintenance of the TV am use can. I can address e.g. screen the format directly via a code. Exactly the same,
like Scart, TV, RGB, etc. select the entrance. But I white as I these to translate am not. In the guidance is located.


Code (Hexa) ----> Funktion ----> Note
C4 ----> Power ON ----> Discrete IR Code (only Power ON)
C5 ----> Power OFF ----> Discrete IR Code (only Power OFF)
D6 ----> TV ----> Discrete IR Code (Input TV Selection)
5A ----> AV1 ----> Discrete IR Code (Input AV1 Selection)
D8 ----> S-Video ----> Discrete IR Code (Input S-Video Selection)
BF ----> Component 1 ----> Discrete IR Code (Input Comp1 Selection)
D4 ----> Component 2 ----> Discrete IR Code (Input Comp2 Selection)
C6 ----> DVI ----> Discrete IR Code (Input DVI Selection)
D5 ----> RGB ----> Discrete IR Code (Input RGB Selection)
76 ----> ARC (4:3) ----> Discrete IR Code (Only 4:3 Mode)
77 ----> ARC (full) ----> Discrete IR Code (Only full Mode)
AF ----> ARC (ZOOM) ----> Discrete IR Code (Only Zoom Mode)
99 ----> AutoConfig ----> Discrete IR Code


I have times the codes in the remote maintenance are trained already to my Pronto.
Only the last 4 numbers changes. That helps! How do I know now the other codes generating?


Here a pair trained codes:

Key ----> trained IR code
1 ---> 900A 006D 0000 0001 04FB 11EE
5 ---> 900A 006D 0000 0001 04FB 15EA
9 ---> 900A 006D 0000 0001 04FB 19E6
0 ---> 900A 006D 0000 0001 04FB 10EF
Power ---> 900A 006D 0000 0001 04FB 02FD
Vol+ ---> 900A 006D 0000 0001 04FB 08F7
Input ---> 900A 006D 0000 0001 04FB 9867


In the manual is located to these keys:
10 ----> key 0 ----> remote maintenance key 0
11 ----> key 1 ----> remote maintenance key 1
15 ----> key 5 ----> remote maintenance key 5
19 ----> key 9 ----> remote maintenance key 9
08 ----> Ein/Aus ----> remote maintenance key Power
02 ----> Vol + ----> remote maintenance key Vol +
98 ----> Input ----> remote maintenance key Input

How can I enter and/or convert or train the codes into the Pronto?

In the guidance Diagramm is like the IR code also still constructs themselves.
Property this as pdf in-scanned and kannes on wish dispatch by mail.
There is not to be used also an IR code computer mur I white as I that is.

Are grateful for each assistance

Greetings Eichi0815