| Post 1 made on Monday September 5, 2005 at 16:08 |
Hi All,
My Key Digital KD-MSW8x3 matrix responds very well to the remote supplied with the device. I cannot, however, get the device to accurately and repeatedly respond to my TSU3000. I have downloaded the ccf file from Key Digital, tried it as is as well as with modified durations of the signals. It responds to each key on an occasional basis. I have ensured there were .1 and .2 second delays between button presses. I have also tried learning the codes from the supplied remote but that did not work well at all.
Any suggestions?
cheers,
csinasac
|
|
| Post 2 made on Tuesday September 6, 2005 at 17:24 |
lhaag Long Time Member |
Joined:
Posts: | April 2004
258 |
|
|
1. You will find the codes that worked for me in the files section. However they were for the TSU7000.
2. I had to insert 2.0 second delays to get good operation.
3. The Switch seems to have a narrow angle to receive IR.
Dave
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
