Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto NG Family Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
project on & input select as one action?
This thread has 3 replies. Displaying all posts.
Post 1 made on Friday April 22, 2005 at 17:29
haddock
Lurking Member
Joined:
Posts:
April 2005
2
Hi Folks,

Apologies for being somewhat repetative in that I posted a similar question in the codes forum to see if there are in fact specific discreet codes to do what I want...
On the assumption no codes exist, I wanted to get opinions on the best approach to
take...

My scenario is simple... as an example I want to have a "watch tv" and "watch dvd"
button that turns on all the appropriate pieces. And I've created these buttons on my
TSU3000 with reasonable success.

The problem comes with my projector. I have discreet codes for turning it on and for
selecting the input. The problem is that in order for the projector to boot up to a point
in which it recognizes the input code I've had to put a really long delay into the macro
between the on code and the input code.

Basically the delay is long enough to be annoying... so I'm trying to figure out what
other options if any there are out there... so ideas appreciated.

One other I've considered but am not necesarily a fan of is to turn everything on... then have my "watch" buttons to pick manually. This doesn't work still because I'd
have to wait myself until the project is booted before hitting the "watch" button.

Thanks,
-James
Post 2 made on Friday April 22, 2005 at 18:23
CV27
Long Time Member
Joined:
Posts:
November 2004
146
No, there is no easy way out of this one. I have a similar problem; I put the power on command for the sleepy device at the top of the macro followed by anything else that can be done in the mean time (amp, TV,cable box, selections...), then a delay if necessary, then the input command.
Post 3 made on Friday April 22, 2005 at 20:05
Anthony
Ultimate Member
Joined:
Posts:
May 2001
28,894
yup they take a long time.

1) did you try doing on-all others-input? does not shorten the time it takes but at least everything is done by the time the input is sent

2) route video through receiver/switcher and use one input on the projector
...
Post 4 made on Friday April 22, 2005 at 22:02
chansen
Long Time Member
Joined:
Posts:
June 2002
18
I had the same issue with my setup. I finally went to two buttons. The first is an all on. It doesn't really turn everything on just the common pieces i.e. the projector and receiver. I then go pull down my screen, grab the DVD or whatever else I need then I use the remote to "watch tv" or "watch dvd" or "play xbox" . I embed the projector format, the receiver sound decoder, etc in those buttons.

Not pretty, but it works for me.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse