| Post 1 made on Saturday January 8, 2005 at 00:51 |
boost Lurking Member |
Joined:
Posts: | December 2004
6 |
|
|
When learning IR codes the Pronto siezes up and i have to unplug the battery to get it going again any ideas,i have downloaded the latest softwere?
It's an ru980 as iam in australia.
|
How did i do that again! |
|
| Post 2 made on Saturday January 8, 2005 at 00:54 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
Are you learning through PPENG or directly on the remote. If PPENG, try learning directly. Also, rebooting your computer helps if it needs to be reset.
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
| OP | Post 3 made on Saturday January 8, 2005 at 01:02 |
boost Lurking Member |
Joined:
Posts: | December 2004
6 |
|
|
Learning from one remote to the Pronto
|
How did i do that again! |
|
| Post 4 made on Saturday January 8, 2005 at 01:23 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
Yes, but directly (without using PPENG) or are you doing it from within PPENG?
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
| OP | Post 5 made on Saturday January 8, 2005 at 01:44 |
boost Lurking Member |
Joined:
Posts: | December 2004
6 |
|
|
with out
|
How did i do that again! |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
