| Post 1 made on Friday January 7, 2005 at 09:54 |
I know how to program Marcos with my 2000 and 6000 remotes like the Device or action commands. I just got the new 7000 and i am lost I can not figure out how to program action or device. Like action to make it jump to the right input and device to make it end up at the right page.
THANKS
Dennis Fucci
|
Dennis |
|
| Post 2 made on Friday January 7, 2005 at 12:06 |
ddarche Mr. RemoteQuest |
Joined:
Posts: | February 2002
2,309 |
|
|
I assume you are using PPENG to program? It is soooo much easier than trying to do it directly into the Pronto. With PPENG, double click on any button and the Button Properties menu opens and all of the commands you need are right there.
Dave D'Arche
|
Dave D'Arche http://RemoteQuest.comFine Home Theater Remote Controls & Solutions - Programming services for most remotes |
|
| OP | Post 3 made on Friday January 7, 2005 at 21:10 |
I have been able to create Marcos in PPENG like you said. But i can not figure out how to get it to work. It is light gray in them home menu. How to i activate it?
THANKS
Dennis
|
Dennis |
|
| Post 4 made on Saturday January 8, 2005 at 00:50 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
If a button appears grey, it means that you have not programmed any actions on it. Macros work pretty much exactly the same way as on the 2000.
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
