I have a rf device which opperates at 433mhz and i would like to control it with my tsu3000 from what i understand the rf frequency on a tsu3000 will not do that as the rf frequency is different so it will not work.
is this true ?
And if so how can I ?
I have read in other threads and seen something about using a powermid transmitter to send 433mhz from a tsu3000 IR signal Where do i get6 the infrared signal from?

This seams all very well but how do i change my rf device signal to ir for this to work.

Can i send from my rf device the rf signal to a powermid reciever. bassicly riverse the cycle.
by doing this thats if it works will it be able to send a valid working ir signal to my pronto to learn.
which i can then use?

The 3000 operates at 418MHz, so you can't use it to operate your device.

Even if you can get some other equipment to take an IR signal from your 3000 and convert it to RF at 433MHz, you will still need a way to get the codes for your device.

I think i know how to do it but still need help found a thread on it but cant find it again