| Post 1 made on Tuesday January 4, 2005 at 23:40 |
lvsrobs Long Time Member |
Joined:
Posts: | October 2003
127 |
|
|
Hi PRONTO FIGHTERS! I do not deal with Prontos almost one year , we switched to MX remotes , because of service issues - but I have to take care of services and we sold a lot of these head ache remotes. I have one and I belive simple question for you - one of customers Pronto 3000 -ON and OFF macro buttons works on 100% only , if I push and hold button about 2 sec. , short push sometimes does not send complete macro. This remote works with RF base , but there is no problem.Do you have any idea , what I can do wrong.Thank you for help - Rob
|
|
| Post 2 made on Wednesday January 5, 2005 at 23:23 |
First, get the latest firmware in the device and re-download the pcf with the latest version of PENG. If these are single-action soft buttons, the fix is to add a 0.1 second delay before the IR code to make it a macro. This forces it to lengthen the IR duration window. Then it should work with a short press.
I remember some really early versions of the firmware having problems executing macros, but not recently.
This message was edited by onward on 01/06/05 21:51 ET.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
