hello to all,

i have the tsu3000 and i'm just starting to take the time tto create my on ccf/pcf file. however i've have gotten a point that once everything is in place i won't be able to axcess the tools button so that i can hit the learn button and find the brands that i'm looking for to program the remote any suggestion

Do you have removed the pronto-icon from system page? If no, hold it down for more then 3 seconds.

Hagen Schütte

so ur saying if i didn't do anything to the tools button even though it not listed or being seen that that button still should work

The Tools button on the 3000 used to be below the screen on the far left, accesible via a hard button.

If it is covered up or deleted, the other way to get to the Tools menu is to hold down the Pronto Icon at the top of most stock configurations. You have to hold it 3-4 seconds.

If you have removed it or covered it up, I think you can program any button to link to the tools menu. If you are programming a new button, you will want to look at the bottom of the button properties menu and use the Special Actions area. I think Tools is a choice in there. Probably still needs a 3-4 second press.

Dave D'Arche

Or you can just add a button some where on all your pages for it. That is what I did. I have a little wrench in the bottom left of all my pages.