| Post 1 made on Sunday January 2, 2005 at 01:23 |
sklasen Long Time Member |
Joined:
Posts: | January 2005
23 |
|
|
As anyone had any luck getting their 3000 to learn the IR commands from a Pioneer Elite DVD 47ai player? The Pronto is very finicky when trying to learn the codes. Eventually it seems to get them, but then they dont work when I try to use them. I dont have problems learning any other device IR commands. Does anyone have a complete set of discrete commands or already learned commands for this DVD player? I didnt see any in the files section...
Thanks...
Steve
|
|
| Post 2 made on Monday January 3, 2005 at 18:50 |
RyanWright Lurking Member |
Joined:
Posts: | December 2004
1 |
|
|
Steve,
If you look in my color system config file, I have codes for a DV47a, I think the remote codes might be the same as the 4ai, it's worth a try. I also had difficulties getting my TSU7000 to learn the Pioneer Elite codes but eventually succeeded.
Ryan
|
|
| OP | Post 3 made on Monday January 3, 2005 at 19:24 |
sklasen Long Time Member |
Joined:
Posts: | January 2005
23 |
|
|
Thanks! I did manage to seemingly get mine to learn. However, it takes a long press on the pronto to get them to actually work with the unit. Must be something with the pioneer IR format??
Steve
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
