| Post 1 made on Saturday December 18, 2004 at 09:03 |
puch27 Long Time Member |
Joined:
Posts: | December 2004
12 |
|
|
Has anyone managed to control x10 via a IR7243W and a Pronto Pro 980.
I have tried the PCF file that is on the Lets Automate page for the IR7243W but I have no contol via IR or RF.
Has anyone else managed this.
Many thanks.
|
|
| Post 2 made on Saturday December 18, 2004 at 19:35 |
Jeff Westrop Lurking Member |
Joined:
Posts: | December 2004
8 |
|
|
I have managed to get the 980 and 7243AH to work together, have not been able to test on much kit yet but it works on unit 1 OK - on and off at least.
I tried the file X10cinemar but it did not work fully, therefore I tried a few other files.
The key to it seems to be that the 'on' and 'off' commands from all the files I had tried did not work but after some investigation I found the commands from the tsu3000 25 file worked but I had to copy the actual IR code as it will not load into the 980 system.
Also I include a 0.2 second delay before the A and the 'on/off' commands.
I am new to X10 so I have not had too much chance to play around with this yet but I thing this should work for you.
That may all sound confusing so let me know if you need more info
cheers
Jeff
|
|
| OP | Post 3 made on Monday December 20, 2004 at 06:37 |
puch27 Long Time Member |
Joined:
Posts: | December 2004
12 |
|
|
Hi Jeff!
Are you using IR or RF?
Thanks.
Regards Alf
|
|
| Post 4 made on Wednesday December 22, 2004 at 15:37 |
Jeff Westrop Lurking Member |
Joined:
Posts: | December 2004
8 |
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
