Ok, i know a lot of people already asked about this but the threads I've try to read I couldn't understand! So, the problem is that I need a code that keeps the key pressed for 2 seconds. I have tried to repeat the comand several times in a macro but the control just send them as many key presses and not a long press. If anyone can help, here are the codes (another strange thing, they both produce the same result, ie. turning the projector ON)

1)
0000 007F 0022 0002 0125 0093 0013 0011 0013 0011 0013 0011 0013 0036 0013 0036 0013 0011 0013 0011 0013 0011 0013 0036 0013 0011 0013 0011 0013 0036 0013 0011 0013 0036 0013 0036 0013 0036 0013 0011 0013 0011 0013 0011 0013 0036 0013 0011 0013 0011 0013 0011 0013 0011 0013 0036 0013 0036 0013 0036 0013 0011 0013 0036 0013 0036 0013 0036 0013 0036 0013 0549 0125 0049 0013 0C49

2)
900A 006D 0000 0001 18E9 08F7

Thanks in advance.

With the tsu3000/ru950 and last 3.1.15, you can use a macro like
[c] codeOnce
[c] codeRepeat
[c] codeRepeat
....
[c] codeRepeat

when codeOnce is your code and codeRepeat is
0000 007f 0000 0020 0125 0049 0013 0C49 0125 0049 0013 0C49 0125 0049 0013 0C49 0125 0049 0013 0C49 0125 0049 0013 0C49 0125 0049 0013 0C49 0125 0049 0013 0C49 0125 0049 0013 0C49 0125 0049 0013 0C49 0125 0049 0013 0C49 0125 0049 0013 0C49 0125 0049 0013 0C49 0125 0049 0013 0C49 0125 0049 0013 0C49 0125 0049 0013 0C49 0125 0049 0013 0C49

The number of codeRepeat instances you need to check experimently.

Didn't work! If I use just the original code, without repeating, and keep the button pressed on Pronto it works, but the repeating procedure described in the last post don't work.

When I keep pressed a key with only one time the code described as the repeating part it doesn't work at all, doesn't turn the projector on. It's a NEC LT260k.

This message was edited by FernandoS on 04/26/04 10:54.

If anyone can help, the problem persists.

Ok, I could make it work, this way:

0000 006D 0024 0000 0155 00AC 0015 0015 0015 0015 0015 0015 0015 0041 0015 0041 0015 0015 0015 0015 0015 0015 0015 0041 0015 0015 0015 0015 0015 0041 0015 0015 0015 0041 0015 0041 0015 0041 0015 0015 0015 0015 0015 0015 0015 0041 0015 0015 0015 0015 0015 0015 0015 0015 0015 0041 0015 0041 0015 0041 0015 0015 0015 0041 0015 0041 0015 0041 0015 0041 0015 05EB 0155 0056 0015 00AC

0000 006D 0026 0000 0155 00AC 0015 0015 0015 0015 0015 0015 0015 0041 0015 0041 0015 0015 0015 0015 0015 0015 0015 0041 0015 0015 0015 0015 0015 0041 0015 0015 0015 0041 0015 0041 0015 0041 0015 0015 0015 0015 0015 0015 0015 0041 0015 0015 0015 0015 0015 0015 0015 0015 0015 0041 0015 0041 0015 0041 0015 0015 0015 0041 0015 0041 0015 0041 0015 0041 0015 05EB 0155 0056 0015 0E55 0155 0056 0015 00AC

900A 006D 0000 0001 18E9 08F7

I've placed this 3 codes in a macro and then repeated them in the macro 4 times, then 2 seconds delay and then link to another macro with the same 3 codes repeated 4 times...

It's the only way it works... Could anybody explain me why? And why THOSE 3 codes?