Hello,

I saw someone else mention this, but haven't seen a solution. Since upgrading to the latest version of the TSU3000 firmware, my left most hard button in the row of four directly below the screen is stuck with the label "Tools". Any known workaround?

Even if you rename the button on the system page (i.e. "test"), "Tools" is still there, but the new action assigned will work.

Otherwise the new firmware works ok for me (the other problems mention don't really bother me).

Thanks for any tips,
Steve

This is what I did and it was suggested for another fix as well here on the forums.

Pull up a new configuration in PENG.
Go to Merge in the File menu.
Pick your config and it will merge it with the new empty one on the screen.

This may fix the problem, know it fixes the time issue people were having. It also updates the headers on the pages to the new format.

Good luck,
Christine

Christine is correct, you need to merge your configuration with a new "blank" one. This will fix the problem (at least it did for me).

Am i being thick? There is no Merge option in the File menu??

Help me out here guys (and Gals) im struggling with this new NG stuff, much prefferred PE V4 !!

I beleive it Has to be edited under the System Page.

Robbie S

Double check your PENG Version sounds to me like your running an older version. The correct version you should be running is ver 2.0.6. I believe the older versions did not have the merge options.

CarlosA