| Post 1 made on Thursday April 8, 2004 at 19:22 |
I have created full remotes that work perfectly in the IR mode. When I switch over to RF they will work while I test the button reponse but after a while the remote will no longer work in the RF mode. I switch back to IR mode and my remote works like a champ. Any suggestions?
|
|
| Post 2 made on Thursday April 8, 2004 at 20:13 |
Lowpro Select Member |
Joined:
Posts: | March 2004
2,081 |
|
|
Well you would have to rule out your RF Extender first as not being the problem, but I just recently purchased my first TSU7000 and the RF was completely hosed. If I set any devices in my profile to RF I would get more than frequent lockups and the RF just did not work. Every once in a while it would work for a few seconds, but that is it. Once I changed my devices back to IR the remote worked fine. My TSU3000 has never had a problem with IR or RF. Works great. I returned the TSU7000 for another one just a few days ago and now the RF is working beautifully. It is not as strong as the 3000 for some reason, but works well.
-Lowpro
|
LP Related Links:
View my profile to access various
links to key posts and downloads. |
|
| Post 3 made on Tuesday April 13, 2004 at 19:09 |
Do you have a wireless network running? My 3000 RF would just not work at all well with the 802.11b running. Fortunatley, I dod not use the network much wirlessly, so I just turned it off.
Take Care
Bill McL
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
