Hi all!

On my Tv remote (the tv is a Philips WS328506) I only have one button to switch between all the AV channels.
But I would like one button to each AV channel, is there any possibilities to do this with the TSU-3000 ?

I assume that you have checked the File section for discrete codes. If there are none, you may be able to create your own macros that will serve as direct input access buttons. This has been described in previous threads, but basically it will only work if you have some button which will always select the tv's internal tuner like channel up on some tv's. This will give you a known starting point to then give the number of input commands that correspond to the input you want. For example, Input 1 macro would be: channel up, input. Input 2 would be: channel up, input, input. ETC. The first thing to check though is if the channel up command will take the tv from an input mode back to the tv tuner.

Hope this helps.

Thanks about the idea of a macro, hadn't thought of doing it that way.

I Will try some of the philips dicrete codes first though.

So how does this work if your TV (Philips 34PW850) powers on changes to it's last used input? it would be perfect if it would default back to AV1 or another input so you can just make a macro to change to whatever input you need....but this will not work if the input changes as it does on my TV. I think discrete codes might do the trick, but I don't think my Philips 34PW850 supports these, or does it??? Don't have a Pronto yet, but will buy one if I get a positive answer on my question...Thanks!