After many attempts and some critical help from some of you, I appear to have successfully loaded a bitmap of a photo into RC5000 Setup. I resized it to be within the 240 X 219 pixel limitation and changed the color to be within the 2, 4, or 8 bits per pixel requirement. The photo now appears on the panel of a "new device" I established for it in RC5000 setup. However, when I bring up the emulator or download the CCF to my control, the panel is blank. What am I missing? Thanks in advance.

The panel needs to have an action to show up. If you loaded your bitmap on a button, just add a delay action to the button. If you loaded your bitmap to a frame, stick a button with a delay action on your panel. Then put your picture frame on top of it so you can't see the button. The panel should show up then.

Try adding a delay in the "action" tab for the button. I have several pictures in my configuration with jumps to other panels and when I first programmed them in, they wouldn't show up.

Hope this helps,

Reef

Andrea and Refugio,

That did it. I thought it was something simple but I just couldn't fine the answer. Thanks much.